Welcome to WetTrades!
(03) 9555 4108 info@wettrades.com
  • $38.50

    OX Ultimate ORBIS 200mm Wide End Cutting Nippers

  • $38.50

    OX Ultimate ORBIS 250mm Narrow Head End Cutting Nippers

  • $17.86

    Polystyrene Foam Sheets 2.5 x 1.2M @ 40mm

    Polystyrene Foam Sheets M Grade 5 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $18.58

    Polystyrene Foam Sheets 2.5 x 1.2M @ 50mm

    Polystyrene Foam Sheets M Grade 5 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $27.83

    Polystyrene Foam Sheets 2.5 x 1.2M @ 75mm

    Polystyrene Foam Sheets M Grade 5 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $50.60

    Polystyrene Foam Sheets 3 x 1.2M @ 100mm

    Polystyrene Foam Sheets M Grade 3 x 1.2M @ 100mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $25.30

    Polystyrene Foam Sheets 3 x 1.2M @ 50mm

    Polystyrene Foam Sheets M Grade 3 x 1.2M @ 50mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $38.50

    Polystyrene Foam Sheets 3 x 1.2M @ 75mm

    Polystyrene Foam Sheets M Grade 3 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $74.36

    Polystyrene Foam Sheets 5 x 1.2M @ 100mm

    Polystyrene Foam Sheets M Grade 5 x 1.2M @ 100mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $37.18

    Polystyrene Foam Sheets 5 x 1.2M @ 50mm

    Polystyrene Foam Sheets M Grade 5 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $55.77

    Polystyrene Foam Sheets 5 x 1.2M @ 75mm

    Polystyrene Foam Sheets M Grade 5 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • Placeholder
    $101.20

    Polystyrene Foam Sheets 6 x 1.2M @ 100mm

    Polystyrene Foam Sheets M Grade 6 x 1.2M @ 100mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $77.00

    Polystyrene Foam Sheets 6 x 1.2M @ 75mm

    Polystyrene Foam Sheets M Grade 6 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $13.20

    Polystyrene Render Float 320 x 180mm Ptd.

    BS Poly Float 320 x 180mm Ptd.

    White Poly Float used for render application. One piece molded from high quality polystyrene.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of Renderer’s so if you are looking for a quality job done we can connect you without delay.

     

    This product is part of our large selection of Rendering tools, and you can find more information on this product by following the links to our suppliers website.

     

    Polystyrene Render Float

     

  • $29.70

    Profile Unit L Shaped

  • $55.00

    Promura Waterproofer

    Waterproofer

  • $16.50

    Ransom F Clamp 200 x 80mm

  • $13.20

    Ransom F Clamp 300 x 50mm

  • $19.80

    Ransom Fold Rule 1M

  • $17.60

    Render Scoop Long Handle

    Heavy Duty Stainless Steel Scoop Rendering – Long Handle 45cm

    Ideal for scooping render, texture, plaster etc on to the hawk.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of Renderer’s so if you are looking for a quality job done we can connect you without delay.

     

    This product is part of our large selection of Rendering tools, and you can find more information on this product by following the links to our suppliers website.

     

  • $52.80

    Rendex Pre Rendered Polystyrene Foam 2.4 x 1.2M 50mm

    The RendeX® Panel is used in the RendeX® External Cladding System and installed directly fixed on the frame or in a cavity system with the option of horizontal or vertical battens.

    The RendeX® Panel comes in thicknesses of 50, 75, 100mm M-Grade EPS. Standard Sizes available ex Stock in Victoria and South Australia.

    Prestige Wall Systems is a manufacturer of RendeX® External Cladding System.

    It is an insulating, decorative and protective finish system for exterior walls that can be used for many types of constructions. The RendeX® External Cladding System is fully BCA Compliant.

    The RendeX® Panel has been tested in accordance with AS/NZS 4284 (weatherproofing) and AS4040.2/4040.3 BAC 2010 (wind loads).

    RendeX®  has been approved as an external cladding and wall insulation system and accredited by the Building Regulations Advisory Committee (BRAC) – Certificate Number v13/01 and been awarded CodeMark Accreditation – Certificate Number CM40090.RendeX® is also suitable to use in Bushfire areas with requirements up to BAL 29

     

    https://www.rendex.com.au/external-cladding

  • $59.40

    Rendex Pre Rendered Polystyrene Foam 2.4 x 1.2M 75mm

    The RendeX® Panel is used in the RendeX® External Cladding System and installed directly fixed on the frame or in a cavity system with the option of horizontal or vertical battens.

    The RendeX® Panel comes in thicknesses of 50, 75, 100mm M-Grade EPS. Standard Sizes available ex Stock in Victoria and South Australia.

    Prestige Wall Systems is a manufacturer of RendeX® External Cladding System.

    It is an insulating, decorative and protective finish system for exterior walls that can be used for many types of constructions. The RendeX® External Cladding System is fully BCA Compliant.

    The RendeX® Panel has been tested in accordance with AS/NZS 4284 (weatherproofing) and AS4040.2/4040.3 BAC 2010 (wind loads).

    RendeX®  has been approved as an external cladding and wall insulation system and accredited by the Building Regulations Advisory Committee (BRAC) – Certificate Number v13/01 and been awarded CodeMark Accreditation – Certificate Number CM40090.RendeX® is also suitable to use in Bushfire areas with requirements up to BAL 29

     

    https://www.rendex.com.au/external-cladding

  • Placeholder
    $99.00

    Rhino Wrap Builders Paper 1350mm 60M

    Rhino Foil RF51 – 1350mm x 60m Coverage – 81m (RF51-60)

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tradies so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of Building Material supplies and you can find more information and data sheets on this product by following the links to the Thor website.

     

    Thor Breathable builders paper

     

  • $22.00

    Screws 100mm (250box)

    Square Drive Poly Screws Course Thread, 100mm (250box)

    Class 4 Poly Screws with a square drive head, has a course thread suited for application into wood frame system – Dacromet coated, this screw has a much harder coating and strong coating over Galvanised coatings, exceeding Australian Standards. Used for installation of all EPS Polystyrene systems on the Australian market. To suit 50mm Boards.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tilers so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of fixings, you can find more information and data sheets on this product by following the links to our suppliers website.

    Screws 100mm

  • $24.20

    Screws 125mm (250box)

    Square Drive Poly Screws Course Thread, 125mm (250Pk)

    Class 4 Poly Screws with a square drive head, has a course thread suited for application into wood frame system – Dacromet coated, this screw has a much harder coating and strong coating over Galvanised coatings, exceeding Australian Standards. Used for installation of all EPS Polystyrene systems on the Australian market. To suit 50mm Boards.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tilers so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of fixings, you can find more information and data sheets on this product by following the links to our suppliers website.

     

    Screws 125mm

  • $33.00

    Screws 150mm (250Box)

    Square Drive Poly Screws Course Thread, 150mm (250Pk)

    Class 4 Poly Screws with a square drive head, has a course thread suited for application into wood frame system – Dacromet coated, this screw has a much harder coating and strong coating over Galvanised coatings, exceeding Australian Standards. Used for installation of all EPS Polystyrene systems on the Australian market. To suit 50mm Boards.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tilers so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of fixings, you can find more information and data sheets on this product by following the links to our suppliers website.

    Screws 150mm

  • $30.00

    Screws 75mm (500box)

    Square Drive Poly Screws Course Thread, 75mm (500box)

    Class 4 Poly Screws with a square drive head, has a course thread suited for application into wood frame system – Dacromet coated, this screw has a much harder coating and strong coating over Galvanised coatings, exceeding Australian Standards. Used for installation of all EPS Polystyrene systems on the Australian market. To suit 50mm Boards.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tilers so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of fixings, you can find more information and data sheets on this product by following the links to our suppliers website.

     

    Screws

     

  • Small Tool – 12mm (1/2inch )

    Small Tool 12mm

    This forged steel will suit’ plasterers dealing with finer plaster work.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of Renderer’s so if you are looking for a quality job done we can connect you without delay.

    This product is part of our large selection of Rendering tools and more information can be found on our suppliers website.

     

    Small Tool 12mm

     

  • $11.88

    Small Tool – 12mm (1/2inch )

  • $11.88

    Small Tool – 18mm (3/4inch)

    Small Tool 25mm

    This forged steel will suit’ plasterers dealing with finer plaster work.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of Renderer’s so if you are looking for a quality job done we can connect you without delay.

    This product is part of our large selection of Rendering tools and more information can be found on our suppliers website.

     

    Small Tool 18mm