Welcome to WetTrades!
(03) 9555 4108 info@wettrades.com
  • $70.00

    Polystyrene Foam Sheets 6 x 1.2M @ 75mm

    Polystyrene Foam Sheets M Grade 6 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $50.00

    Promura Waterproofer

    Waterproofer

  • $64.00

    Rendex Pre Rendered Polystyrene Foam 2.4 x 1.2M 100mm

    The RendeX® Panel is used in the RendeX® External Cladding System and installed directly fixed on the frame or in a cavity system with the option of horizontal or vertical battens.

    The RendeX® Panel comes in thicknesses of 50, 75, 100mm M-Grade EPS. Standard Sizes available ex Stock in Victoria and South Australia.

    Prestige Wall Systems is a manufacturer of RendeX® External Cladding System.

    It is an insulating, decorative and protective finish system for exterior walls that can be used for many types of constructions. The RendeX® External Cladding System is fully BCA Compliant.

    The RendeX® Panel has been tested in accordance with AS/NZS 4284 (weatherproofing) and AS4040.2/4040.3 BAC 2010 (wind loads).

    RendeX®  has been approved as an external cladding and wall insulation system and accredited by the Building Regulations Advisory Committee (BRAC) – Certificate Number v13/01 and been awarded CodeMark Accreditation – Certificate Number CM40090.RendeX® is also suitable to use in Bushfire areas with requirements up to BAL 29

     

    https://www.rendex.com.au/external-cladding

  • Placeholder
    $48.00

    Rendex Pre Rendered Polystyrene Foam 2.4 x 1.2M 50mm

    The RendeX® Panel is used in the RendeX® External Cladding System and installed directly fixed on the frame or in a cavity system with the option of horizontal or vertical battens.

    The RendeX® Panel comes in thicknesses of 50, 75, 100mm M-Grade EPS. Standard Sizes available ex Stock in Victoria and South Australia.

    Prestige Wall Systems is a manufacturer of RendeX® External Cladding System.

    It is an insulating, decorative and protective finish system for exterior walls that can be used for many types of constructions. The RendeX® External Cladding System is fully BCA Compliant.

    The RendeX® Panel has been tested in accordance with AS/NZS 4284 (weatherproofing) and AS4040.2/4040.3 BAC 2010 (wind loads).

    RendeX®  has been approved as an external cladding and wall insulation system and accredited by the Building Regulations Advisory Committee (BRAC) – Certificate Number v13/01 and been awarded CodeMark Accreditation – Certificate Number CM40090.RendeX® is also suitable to use in Bushfire areas with requirements up to BAL 29

     

    https://www.rendex.com.au/external-cladding

  • $54.00

    Rendex Pre Rendered Polystyrene Foam 2.4 x 1.2M 75mm

    The RendeX® Panel is used in the RendeX® External Cladding System and installed directly fixed on the frame or in a cavity system with the option of horizontal or vertical battens.

    The RendeX® Panel comes in thicknesses of 50, 75, 100mm M-Grade EPS. Standard Sizes available ex Stock in Victoria and South Australia.

    Prestige Wall Systems is a manufacturer of RendeX® External Cladding System.

    It is an insulating, decorative and protective finish system for exterior walls that can be used for many types of constructions. The RendeX® External Cladding System is fully BCA Compliant.

    The RendeX® Panel has been tested in accordance with AS/NZS 4284 (weatherproofing) and AS4040.2/4040.3 BAC 2010 (wind loads).

    RendeX®  has been approved as an external cladding and wall insulation system and accredited by the Building Regulations Advisory Committee (BRAC) – Certificate Number v13/01 and been awarded CodeMark Accreditation – Certificate Number CM40090.RendeX® is also suitable to use in Bushfire areas with requirements up to BAL 29

     

    https://www.rendex.com.au/external-cladding

  • Placeholder
    $90.00

    Rhino Wrap Builders Paper 1350mm 60M

    Rhino Foil RF51 – 1350mm x 60m Coverage – 81m (RF51-60)

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tradies so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of Building Material supplies and you can find more information and data sheets on this product by following the links to the Thor website.

     

    Thor Breathable builders paper

     

  • $20.00

    Screws 100mm (250box)

    Square Drive Poly Screws Course Thread, 100mm (250box)

    Class 4 Poly Screws with a square drive head, has a course thread suited for application into wood frame system – Dacromet coated, this screw has a much harder coating and strong coating over Galvanised coatings, exceeding Australian Standards. Used for installation of all EPS Polystyrene systems on the Australian market. To suit 50mm Boards.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tilers so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of fixings, you can find more information and data sheets on this product by following the links to our suppliers website.

    Screws 100mm

  • $22.00

    Screws 125mm (250box)

    Square Drive Poly Screws Course Thread, 125mm (250Pk)

    Class 4 Poly Screws with a square drive head, has a course thread suited for application into wood frame system – Dacromet coated, this screw has a much harder coating and strong coating over Galvanised coatings, exceeding Australian Standards. Used for installation of all EPS Polystyrene systems on the Australian market. To suit 50mm Boards.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tilers so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of fixings, you can find more information and data sheets on this product by following the links to our suppliers website.

     

    Screws 125mm

  • $30.00

    Screws 150mm (250Box)

    Square Drive Poly Screws Course Thread, 150mm (250Pk)

    Class 4 Poly Screws with a square drive head, has a course thread suited for application into wood frame system – Dacromet coated, this screw has a much harder coating and strong coating over Galvanised coatings, exceeding Australian Standards. Used for installation of all EPS Polystyrene systems on the Australian market. To suit 50mm Boards.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tilers so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of fixings, you can find more information and data sheets on this product by following the links to our suppliers website.

    Screws 150mm

  • $27.27

    Screws 75mm (500box)

    Square Drive Poly Screws Course Thread, 75mm (500box)

    Class 4 Poly Screws with a square drive head, has a course thread suited for application into wood frame system – Dacromet coated, this screw has a much harder coating and strong coating over Galvanised coatings, exceeding Australian Standards. Used for installation of all EPS Polystyrene systems on the Australian market. To suit 50mm Boards.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tilers so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of fixings, you can find more information and data sheets on this product by following the links to our suppliers website.

     

    Screws

     

  • Small Tool – 12mm (1/2inch )

    Small Tool 12mm

    This forged steel will suit’ plasterers dealing with finer plaster work.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of Renderer’s so if you are looking for a quality job done we can connect you without delay.

    This product is part of our large selection of Rendering tools and more information can be found on our suppliers website.

     

    Small Tool 12mm

     

  • $10.80

    Small Tool – 25mm (1inch)

    Small Tool 25mm

    This forged steel will suit’ plasterers dealing with finer plaster work.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of Renderer’s so if you are looking for a quality job done we can connect you without delay.

    This product is part of our large selection of Rendering tools and more information can be found on our suppliers website.

     

    Smal Tool 25mm

     

  • $9.00

    Soudal Sealant 600ml Concrete Grey

    Soudal Multibond SMX35 Seal & Stretch Concrete Grey 300ml

     

    DESCRIPTION

    Multibond SMX35 is a high quality, single component, permanently flexible joint sealant. Perfect for internal & external applications. Based on SMX® Polymer Multibond SMX35 has a “Shore A” hardness of 35 and can accommodate movement of ± 20 %. Multibond SMX35 has excellent UV resistance, elasticity and can be sanded and painted with most types of paint. Once cured forms a strong, flexible, waterproof seal and bonds to the widest range of substrates. Multibond SMX35 can be used for damp and wet surfaces.

     

    APPLICATIONS

    Multibond SMX35 – Seal & Stretch is ideal for a wide range of sealing applications in construction and industrial including…..

    • Expansion joints

    • Joints under waterproofing membranes (water-based, solvent-based and acrylic)

    • Masonry and precast concrete joints

    • For sanitary, bathroom and kitchen areas (resists mould growth)

    • For walls and perimeter joints

    • For water retaining structures (Concrete Grey water potable approved)

    • For lap joints in roofing, guttering and cladding,

    • For air conditioning ducting,

    • For caravan, bus and automotive use

    • For window and door frames.

     

    FEATURES & BENEFITS

    • Elastic sealant

    • Highly flexible ±20%

    • Internal & external

    • Multipurpose

    • UV Resistant

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of sealant and adhesive supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

     

     

    Soudal Sealant

    Tech Data Soudal Sealant

    MSDS Soudal Sealant

     

  • Placeholder
    $10.00

    Soudal SMX35 600ml White

  • $90.91

    Stabila Level 96-2 1200mm

    Stabila Level 96-2 1200mm

    Extra strong sturdy ribbed box section construction level for the trade and professional user. Suitable for normal and upside down measuring.

    With removable shock-absorbing non-slip end caps that allow for more accurate level end use.

    300 degree angle high-visibility horizontal vial. Quality made in Germany and finished up with scratch resistant paint, the Stabila Level will serve you well for years to come.

    • Permanently fixed vials for lasting accuracy

    • Non-fade vials for high visibility

    • Non-leak vials for lasting accuracy

    • Electrostatic stable vials for high accuracy

    • Machined levelling surfaces for improved accuracy

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of tradesman so if you are looking for a quality job done we can connect you without delay.

    This product is part of our large selection of hand tools and more information can be found on our suppliers website.

     

    Stabila Level 96-2/120 1200mm

     

  • $168.18

    Stabila Level 96-2 2000mm

    Stabila Level 96-2 2000mm

    Extra strong sturdy ribbed box section construction level for the trade and professional user. Suitable for normal and upside down measuring.

    With removable shock-absorbing non-slip end caps that allow for more accurate level end use.

    300 degree angle high-visibility horizontal vial. Quality made in Germany and finished up with scratch resistant paint, the Stabila Level will serve you well for years to come.

    • Permanently fixed vials for lasting accuracy

    • Non-fade vials for high visibility

    • Non-leak vials for lasting accuracy

    • Electrostatic stable vials for high accuracy

    • Machined levelling surfaces for improved accuracy

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of tradesman so if you are looking for a quality job done we can connect you without delay.

    This product is part of our large selection of hand tools and more information can be found on our suppliers website.

     

    Stabila Level 96-2/120 2000mm 

  • $72.73

    Stabila Level 96-2 600mm

    Stabila Level 96-2/60 600mm

    Extra strong sturdy ribbed box section construction level for the trade and professional user. Suitable for normal and upside down measuring.

    With removable shock-absorbing non-slip end caps that allow for more accurate level end use.

    300 degree angle high-visibility horizontal vial. Quality made in Germany and finished up with scratch resistant paint, the Stabila Level will serve you well for years to come.

    • Permanently fixed vials for lasting accuracy

    • Non-fade vials for high visibility

    • Non-leak vials for lasting accuracy

    • Electrostatic stable vials for high accuracy

    • Machined levelling surfaces for improved accuracy

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of tradesman so if you are looking for a quality job done we can connect you without delay.

    This product is part of our large selection of hand tools and more information can be found on our suppliers website.

     

    Stabila Level 96-2/120 600mm 

  • $77.27

    Stabila Level 96-2 800mm

    Stabila Level 96-2 800mm

    Extra strong sturdy ribbed box section construction level for the trade and professional user. Suitable for normal and upside down measuring.

    With removable shock-absorbing non-slip end caps that allow for more accurate level end use.

    300 degree angle high-visibility horizontal vial. Quality made in Germany and finished up with scratch resistant paint, the Stabila Level will serve you well for years to come.

    • Permanently fixed vials for lasting accuracy

    • Non-fade vials for high visibility

    • Non-leak vials for lasting accuracy

    • Electrostatic stable vials for high accuracy

    • Machined levelling surfaces for improved accuracy

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of tradesman so if you are looking for a quality job done we can connect you without delay.

    This product is part of our large selection of hand tools and more information can be found on our suppliers website.

     

    Stabila Level 96-2/120 800mm 

  • $20.50

    Tampico Brush

    Tampico Water Brush

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of Renderer’s so if you are looking for a quality job done we can connect you without delay.

    This product is part of our large selection of Rendering tools and more information can be found on our suppliers website.

     

    Tampico Water Brush

     

  • $4.50

    Tenacious Blue Cloth Tape 36mm

    Tenacious RenderMask Cloth Tape 36mm
    Tenacious K180 RenderMask™ cloth tape has been specifically developed for the rendering industry. The product provides 14 Day UV protection on aluminium window frames during the rendering process. Adheres to concrete, brick-work, aluminium, PVC and painted surfaces.

    The product is waterproof, clean removes and snaps off loose render when the tape is removed, providing an ultra clean finish.

    Tenacious RenderMask™ is an industry standard.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Tradies so if you are looking for the right man for your job we can connect you without delay.

    This product is part of our large selection of tape’s and you can find more information on this product by following the link below.

     

    Tenacious Blue Render Cloth Tape

     

  • $6.00

    Tenacious Blue Cloth Tape 48mm

    Tenacious RenderMask Cloth Tape 24mm (48Box)
    DESCRIPTION

    Tenacious K180 RenderMask™ cloth tape has been specifically developed for the rendering industry. The product provides 14 Day UV protection on aluminium window frames during the rendering process. Adheres to concrete, brick-work, aluminium, PVC and painted surfaces.

    The product is waterproof, clean removes and snaps off loose render when the tape is removed, providing an ultra clean finish.

    Tenacious RenderMask™ is an industry standard.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Tradies so if you are looking for the right man for your job we can connect you without delay.

     

    This product is part of our large selection of tape’s and you can find more information on this product by following the link below.

     

    Tenacious Blue Render Cloth Tape

     

  • $3.00

    Tenacious Cloth Tape 24mm

  • Placeholder
    $4.20

    Tenacious Cloth Tape 36mm

  • Placeholder
    $5.50

    Tenacious Cloth Tape 48mm

  • Placeholder
    $2.00

    Tenacious Electrical Tape 18mm

    Tenacious Electrical Tape 18mm

  • $7.00

    Uni Pro Brush 63mm

  • Placeholder
    $14.00

    Uni Pro Pull Down drop sheet 1800mm 33M

  • Placeholder
    $6.00

    Uni Pro Pull Down drop sheet 550mm 25M

  • $50.75

    Unitex 333 Fine Texture 15L

    Unitex Uni-Trowel 333 Fine Texture 15L

    Size: 15L pail

    Coverage:

    Fine: 9-10 m2

    Suitable over: Unitex Specialty Renders

    Apply with: Trowel

    Safe Use: Refer to the MSDS

    As the name implies, this range of Unitex Textured Finishes is designed for trowel application. The products in the Uni-Trowel Décor™ range are applied as a single coat, with the exception of the finer finishes (146 and 333) which due to substrate and or weather conditions, may require an additional wet on wet coat.  Unitex Applied Texture Finishes are acrylic-bound textured coatings designed for decorating interior and exterior walls. Unitex Applied Texture Finishes are suitable for use over surfaces prepared with Render from the Unitex Specialty Renders range. A one coat application offers a long life heavy duty coating. Fine texture coats, i.e. Unitex 146, may require wet on wet two coats. The majority of our Finishes are ready-to-use, water-based products. Unitex Applied Texture Finishes are ideal for commercial and residential exterior walls. Due to the strong binding power of the acrylic, an impact-resistant coating results.  The surface prevents scuffing and is able to withstand hard knocks. Uni-Trowel Décor range are available pre-coloured in 15ltr pails, they contain quality graded fine mineral components and aggregates, together with non-absorbent extenders bound by a well-proven acrylic co-polymer. Coverage rates vary considerably with the surface condition and absorption effect. Typical coverage rates are 6 -10m² per pail. There are several grades of Uni-Trowel Décor.

     

    Biological Resistance
    Resistance to attack from bacteria and fungi is provided. This product being a water based acrylic system offers safe handling and low toxicity properties. Dirt, grime and dust on the surface of coatings will act as seed beds for bacterial attack, therefore cleaning and maintenance of your coating is essential to hinder bacterial and fungal attack.

     

    Fire Resistance The full Unitex coating system when subjected to the Early Fire Hazard Tests – Australian Standard AS1530.3:1999 meets the strictest standards.

     

    Water Resistance
    The coating, even at exceptionally high build, is formulated with a water vapour permeability factor to allow water vapour from the substrate to leave unhindered and to rainproof the exterior. Rising damp and elevated levels of moisture in the substrate will damage, and possibly delaminate, the surface coating. Please ensure that damp coursing the substrate is in place and prior test moisture content with a moisture meter (maximum 12% WME is allowed) (Builder responsibility).

     

    Colour
    The pigmentation is completely integrated during the manufacturing process, which means colour through the entire film thickness. Applied Finishes are available in a practically unlimited range of full colour to pastel shades. Please contact Unitex for the full range of colours available.
    Note: Some deep tones cannot be supplied in applied finishes. Contact Unitex for your specific solution. All colours will fade to some degree with time in exterior systems. Do not apply pigmented texture coats over fresh and or not fully cured renders as efflorescent damage (white blotching) may occur. Each pail has a label with the unique code identifying the particular texture type, colour and batch number. This coding ensures that if you require additional product (say to finish off a job), Unitex can match the texture and colour to the original. Note: Conditions on site may change and therefore colour outcome may be different when applied under varying weather conditions.  It is advisable always order 1 or 2 more pails than are required for the job. The pails have a strong sealed lid to prevent spillage if they should tip over before opening. Even after opening the lid still fits tightly enough when re-sealing to prevent contamination of the remaining product. The product must be protected from heat and cold during transit and storage.

     

    Application Details
    A minimum of 72 hours, under ideal temperate conditions, is required for through-dry (and cure) of the render, when the surface is trough dry the Unitex Textured Finish coat may be applied. Dry is measured to be less than 12% WME (Wood Moisture Equivalent) where measured on a Protimeter® Moisture Meter. The substrate must be clean before applying the Finish coat. Any crumbling, loose or damaged substrate render must be removed and the surface patched and made good prior to coating. All surfaces must be free of grease, oils, dirt and dust. Pre-painted surfaces must have flaking paint wire brushed back to a sound substrate. Unitex recommends a base coat of a pigmented Unitex Uni-Substrate Sealer (2 coats) over old renders prior to application of the surface finishes. If multi coats are desired then a minimum of 72 hours between each coat is required. All Unitex Applied Texture Finishes are designed to overcoat Unitex Render from our specialty render range. See Unitex Renders sections for information on suitable base render to use. Application should not be carried out under excessively cold conditions (below 7 °C) or in hot windy conditions (above 32°C).

     

    Site
    Unitex strongly advises sign off on all coating systems. Always provide the Builder and Designer with a site texture sample of minimum 2m², finish and colour for written approval nominated the Unitex specified system.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Unitex website.

     

    Unitex 333 Fine Texture

    MSDS Unitex 333 Fine Texture

  • $59.60

    Unitex 888 Medium Texture15L

    Unitex Uni-Trowel 888 MediumTexture 15L

    Size: 15L pail

    Coverage:

    Fine: 9-10 m2

    Suitable over: Unitex Specialty Renders

    Apply with: Trowel

    Safe Use: Refer to the MSDS

    As the name implies, this range of Unitex Textured Finishes is designed for trowel application. The products in the Uni-Trowel Décor™ range are applied as a single coat, with the exception of the finer finishes (146 and 333) which due to substrate and or weather conditions, may require an additional wet on wet coat.  Unitex Applied Texture Finishes are acrylic-bound textured coatings designed for decorating interior and exterior walls. Unitex Applied Texture Finishes are suitable for use over surfaces prepared with Render from the Unitex Specialty Renders range. A one coat application offers a long life heavy duty coating. Fine texture coats, i.e. Unitex 146, may require wet on wet two coats. The majority of our Finishes are ready-to-use, water-based products. Unitex Applied Texture Finishes are ideal for commercial and residential exterior walls. Due to the strong binding power of the acrylic, an impact-resistant coating results.  The surface prevents scuffing and is able to withstand hard knocks. Uni-Trowel Décor range are available pre-coloured in 15ltr pails, they contain quality graded fine mineral components and aggregates, together with non-absorbent extenders bound by a well-proven acrylic co-polymer. Coverage rates vary considerably with the surface condition and absorption effect. Typical coverage rates are 6 -10m² per pail. There are several grades of Uni-Trowel Décor.

     

    Biological Resistance
    Resistance to attack from bacteria and fungi is provided. This product being a water based acrylic system offers safe handling and low toxicity properties. Dirt, grime and dust on the surface of coatings will act as seed beds for bacterial attack, therefore cleaning and maintenance of your coating is essential to hinder bacterial and fungal attack.

     

    Fire Resistance The full Unitex coating system when subjected to the Early Fire Hazard Tests – Australian Standard AS1530.3:1999 meets the strictest standards.

     

    Water Resistance
    The coating, even at exceptionally high build, is formulated with a water vapour permeability factor to allow water vapour from the substrate to leave unhindered and to rainproof the exterior. Rising damp and elevated levels of moisture in the substrate will damage, and possibly delaminate, the surface coating. Please ensure that damp coursing the substrate is in place and prior test moisture content with a moisture meter (maximum 12% WME is allowed) (Builder responsibility).

     

    Colour
    The pigmentation is completely integrated during the manufacturing process, which means colour through the entire film thickness. Applied Finishes are available in a practically unlimited range of full colour to pastel shades. Please contact Unitex for the full range of colours available.
    Note: Some deep tones cannot be supplied in applied finishes. Contact Unitex for your specific solution. All colours will fade to some degree with time in exterior systems. Do not apply pigmented texture coats over fresh and or not fully cured renders as efflorescent damage (white blotching) may occur. Each pail has a label with the unique code identifying the particular texture type, colour and batch number. This coding ensures that if you require additional product (say to finish off a job), Unitex can match the texture and colour to the original. Note: Conditions on site may change and therefore colour outcome may be different when applied under varying weather conditions.  It is advisable always order 1 or 2 more pails than are required for the job. The pails have a strong sealed lid to prevent spillage if they should tip over before opening. Even after opening the lid still fits tightly enough when re-sealing to prevent contamination of the remaining product. The product must be protected from heat and cold during transit and storage.

     

    Application Details
    A minimum of 72 hours, under ideal temperate conditions, is required for through-dry (and cure) of the render, when the surface is trough dry the Unitex Textured Finish coat may be applied. Dry is measured to be less than 12% WME (Wood Moisture Equivalent) where measured on a Protimeter® Moisture Meter. The substrate must be clean before applying the Finish coat. Any crumbling, loose or damaged substrate render must be removed and the surface patched and made good prior to coating. All surfaces must be free of grease, oils, dirt and dust. Pre-painted surfaces must have flaking paint wire brushed back to a sound substrate. Unitex recommends a base coat of a pigmented Unitex Uni-Substrate Sealer (2 coats) over old renders prior to application of the surface finishes. If multi coats are desired then a minimum of 72 hours between each coat is required. All Unitex Applied Texture Finishes are designed to overcoat Unitex Render from our specialty render range. See Unitex Renders sections for information on suitable base render to use. Application should not be carried out under excessively cold conditions (below 7 °C) or in hot windy conditions (above 32°C).

     

    Site
    Unitex strongly advises sign off on all coating systems. Always provide the Builder and Designer with a site texture sample of minimum 2m², finish and colour for written approval nominated the Unitex specified system.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Unitex website. 

     

    Unitex 888 Medium Texture