Welcome to WetTrades!
(03) 9555 4108 info@wettrades.com
  • $170.00

    Crommelin Membryl 15L Grey/White

    Crommelin Membryl® 15L

    Membryl® is a waterborne elastomeric waterproofing membrane with outstanding long-term UV stability. Membryl® is an effective anti-carbonation membrane for concrete as it exceeds the “Klopfer Criterion” requirements of Sd 50m.

     

    Features

    • Seamless waterproofing system – liquid applied with no joints or laps, not allowing ingress of water or contaminants

    • Elastomeric, even after weathering 

    • Anti-carbonation protection of concrete 

    • Tough – high tensile strength and hardness 

    • Allows substrate to breathe 

    • Fungal and algal resistive – an extended life and clean appearance in high humidity environments 

    • Fire and flame resistive 

    • Chemical attack resistive 

    • Decorative – available in a wide range of durable colours 

    • Excellent resistance to dirt pick up 

    • Very high adhesive strength – no primer required on most surfaces

    • High build – bridges fine cracks 

    • Resistive to impact and light traffic damage 

    • Weatherproof and lightfast 

    • Reflective properties aid in reducing internal air temperatures by up to 20 degrees C

    • Aids in reduction of CO2 emissions 

    • Energy and cost efficient 

    • Resistant to chemical attack 

    • Very high adhesive strength – no primer required on most surfaces 

    • Weatherproof and lightfast 

    • Fungal and algal resistant in high humidity environments 

    • Excellent dirt pick up resistance 

    • Tough – high tensile strength and hardness Low VOC

     

    Areas of Use

    • Concrete structures

    • Concrete roof areas

    • Internal walls

    • External walls – concrete, concrete block, brick and other masonry surfaces.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coating specialist for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

     

    Crommelin Membryl

     

    Data Sheet Crommelin Membryl

  • $6.00

    Crommelin Silicone WP Plus 300G White

    Crommelin Silicone WP Plus 300G White

    Crommelin Silicone WP Plus is a premium, neutral cure silicone sealant engineered for use in kitchens, bathrooms, wet areas and as a bond breaking sealant in waterproofing applications.

     

    Features

    • Mould and mildew resistant

    • Neutral cure – Will not corrode concrete or zinc coated / galvanised steel

    • Permanently flexible; ? 20% joint movement

    • Resistance to weathering and UV radiation

    • Resistant to vibration

    • Strong adhesion

    • One part – no mixing

    • Sag resistant –can be used in vertical and over head joints

     

    Areas of Use

    • Sealing around:

    • Showers

    • Bath tubs

    • Sinks

    • Laundries

    • Sealing and weather proofing sanitary ware and spas

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of sealant and adhesive supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Silicone White

    Data Sheet Crommelin Silicone White

  • $33.81

    Polystyrene Foam Sheets 2.5 x 1.2M @ 100mm

    Polystyrene Foam Sheets M Grade 2.5 x 1.2M @ 100mm

     Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of Polystyrene Foam installers so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $16.24

    Polystyrene Foam Sheets 2.5 x 1.2M @ 40mm

    Polystyrene Foam Sheets M Grade 5 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $16.89

    Polystyrene Foam Sheets 2.5 x 1.2M @ 50mm

    Polystyrene Foam Sheets M Grade 5 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $46.00

    Polystyrene Foam Sheets 3 x 1.2M @ 100mm

    Polystyrene Foam Sheets M Grade 3 x 1.2M @ 100mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $23.00

    Polystyrene Foam Sheets 3 x 1.2M @ 50mm

    Polystyrene Foam Sheets M Grade 3 x 1.2M @ 50mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $35.00

    Polystyrene Foam Sheets 3 x 1.2M @ 75mm

    Polystyrene Foam Sheets M Grade 3 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $67.60

    Polystyrene Foam Sheets 5 x 1.2M @ 100mm

    Polystyrene Foam Sheets M Grade 5 x 1.2M @ 100mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $33.80

    Polystyrene Foam Sheets 5 x 1.2M @ 50mm

    Polystyrene Foam Sheets M Grade 5 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • Placeholder
    $92.00

    Polystyrene Foam Sheets 6 x 1.2M @ 100mm

    Polystyrene Foam Sheets M Grade 6 x 1.2M @ 100mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.

     

  • $70.00

    Polystyrene Foam Sheets 6 x 1.2M @ 75mm

    Polystyrene Foam Sheets M Grade 6 x 1.2M @ 75mm

    Polystyrene EPS panels are a highly versatile expanded polystyrene sheet solution ideal for the building and construction industries.

    Widely used across a number of building applications, Polystyrene EPS panels are a versatile and well proven construction material. Lightweight, strong, clean, and easy to handle, Polystyrene EPS panels provide insulation from temperature and noise and can be used as a base for rendered panels.

    Polystyrene EPS panels are ideal for use in both commercial and residential applications including warehouses, factories, shop fronts, office buildings, houses and apartment blocks, sheds, patios, and garages.

     

    Weather resistant with excellent thermal insulation properties and low moisture absorbency, Polystyrene EPS panels are the perfect material for insulating coolrooms, ceilings, underslabs, walls, and flat and inverted roofs.

     

    Polystyrene Sheet Sizes

    Styroboard EPS Sheets are available in a range of thicknesses from 10mm to 600mm.

    Our standard sheet sizes are as follows:

    2.5M & 5M x 1.2M

    3M & 6M x 1.2M

    Non-standard sheet sizes are available to be cut to your specific order, and sheets can also be ordered in varying thicknesses.

     

    Thermal Properties

    Suitable for use across steel studs, timber studs, and concrete and masonry buildings, Polystyrene Expanded Polystyrene Sheets provide an efficient and economical solution for insulation. Often used on the outside of the wall stud, cavities are maintained closer to room temperature which reduces the risk of surface and cavity condensation. The thermal mass advantages of concrete and masonry walls are also improved.

    Thermal conductivity for Polystyrne EPS grades are shown in the reference below.

    SL Grade

    k = 0.041 W/mk*

     

     

    S Grade

    k = 0.0397 W/mk*

     

     

    M Grade

    k = 0.0383 W/mk*

     

     

    H Grade

    k = 0.0368 W/mk*

     

     

    VH Grade

    k = 0.0352 W/mk*

     

     

     

    * k value @ reference temperature 25°C

     

    R-value

    Nominal R-values (m²K/W) – excluding surface resistance

    EPS sheet thickness

    SLGrade

    SGrade

    MGrade

    HGrade

    41mm

    1.00

    1.05

    1.07

    1.11

    50mm

    1.25

    1.32

    1.33

    1.39

    75mm

    1.90

    1.97

    2.00

    2.08

    100mm

    2.50

    2.63

    2.67

    2.78

     

    Poly EPS and the Effects of Moisture

    It is recommended that an effective vapour barrier be provided in situations where significant moisture content build-up is likely to occur. Polystyrene EPS panels iare generally resistant to moisture gain; however, moisture content will affect its thermal performance as with all insulating material.

    There is a linear relationship between thermal resistance (R-value) loss and moisture content increase by volume. There is an approximate 2.5% loss of R-value per 1% of moisture content by volume increase (up to 20% m.c. by volume). Polystyrene panels that have a 2% moisture content by volume will have 95% of it’s dry R-value.

     

    Our Environment

    The manufacture of Polystyrene EPS panels produce no ozone depleting gases and uses no chlorofluorocarbons (CFCs).

    For each kilogram of oil used in the manufacture of Pol insulation, savings of up to 200kg of heating fuel can be made over the average lifespan of a house. In turn this plays a positive role in reducing carbon dioxide emissions and the effects of global warming.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Polystyrene Foam installers, so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Cladding supplies and you can find more information about it on the Vicfoam website.

    Polystyrene Foam EPS Sheets

     

    *Delivery of this product may attract extra costs due to the large size of the Polystyrene Sheets.