Welcome to WetTrades!
(03) 9555 4108 info@wettrades.com
  • $187.00

    Crommelin Membryl 15L Grey/White

    Crommelin Membryl® 15L

    Membryl® is a waterborne elastomeric waterproofing membrane with outstanding long-term UV stability. Membryl® is an effective anti-carbonation membrane for concrete as it exceeds the “Klopfer Criterion” requirements of Sd 50m.

     

    Features

    • Seamless waterproofing system – liquid applied with no joints or laps, not allowing ingress of water or contaminants

    • Elastomeric, even after weathering 

    • Anti-carbonation protection of concrete 

    • Tough – high tensile strength and hardness 

    • Allows substrate to breathe 

    • Fungal and algal resistive – an extended life and clean appearance in high humidity environments 

    • Fire and flame resistive 

    • Chemical attack resistive 

    • Decorative – available in a wide range of durable colours 

    • Excellent resistance to dirt pick up 

    • Very high adhesive strength – no primer required on most surfaces

    • High build – bridges fine cracks 

    • Resistive to impact and light traffic damage 

    • Weatherproof and lightfast 

    • Reflective properties aid in reducing internal air temperatures by up to 20 degrees C

    • Aids in reduction of CO2 emissions 

    • Energy and cost efficient 

    • Resistant to chemical attack 

    • Very high adhesive strength – no primer required on most surfaces 

    • Weatherproof and lightfast 

    • Fungal and algal resistant in high humidity environments 

    • Excellent dirt pick up resistance 

    • Tough – high tensile strength and hardness Low VOC

     

    Areas of Use

    • Concrete structures

    • Concrete roof areas

    • Internal walls

    • External walls – concrete, concrete block, brick and other masonry surfaces.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coating specialist for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

     

    Crommelin Membryl

     

    Data Sheet Crommelin Membryl

  • Crommelin Powerflex 4L

    Crommelin Powerflex® Primer 4L

    Powerflex®  is a rubber polymer cement additive developed to improve the strength, adhesion, and chemical/moisture resistance of cement screeds, mortars and renders.  Cement mortars based on Powerflex® will adhere to a wide range of materials such as metals, timber, insulation foams as well as new and old concrete.

     
    Features

    • Improves workability

    • Increases durability of concrete and mortars

    • Improved water resistance

    • Reduces water/cement ratio

    • Increase tensile, flexural, impact & compressive strengths

    • Can be applied in thin coats

    • Increases abrasion resistance 

    • Low VOC – Non toxic and environmentally safe

     

    Areas of Use

    • Patching compounds

    • Renders, granolithic coatings and mortar beds

    • Underlayment leveling screeds

    • Adhesion promoter for hard to bond substrates

    • Strengthening cement based adhesives

    • Tile bedding and grouting

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

     

    This product is part of our large selection of waterproofing and sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Powerflex Primer

     

    Data Sheet Crommelin Powerflex Primer

     

  • $82.50

    Crommelin Powerflex Primer 15L

    Crommelin Powerflex® Primer 15L

    Powerflex®  is a rubber polymer cement additive developed to improve the strength, adhesion, and chemical/moisture resistance of cement screeds, mortars and renders.  Cement mortars based on Powerflex® will adhere to a wide range of materials such as metals, timber, insulation foams as well as new and old concrete.

     
    Features

    • Improves workability

    • Increases durability of concrete and mortars

    • Improved water resistance

    • Reduces water/cement ratio

    • Increase tensile, flexural, impact & compressive strengths

    • Can be applied in thin coats

    • Increases abrasion resistance 

    • Low VOC – Non toxic and environmentally safe

     

    Areas of Use

    • Patching compounds

    • Renders, granolithic coatings and mortar beds

    • Underlayment leveling screeds

    • Adhesion promoter for hard to bond substrates

    • Strengthening cement based adhesives

    • Tile bedding and grouting

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

     

    This product is part of our large selection of waterproofing and sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Powerflex Primer

     

    Data Sheet Crommelin Powerflex Primer

     

  • $6.60

    Crommelin Silicone WP Plus 300G White

    Crommelin Silicone WP Plus 300G White

    Crommelin Silicone WP Plus is a premium, neutral cure silicone sealant engineered for use in kitchens, bathrooms, wet areas and as a bond breaking sealant in waterproofing applications.

     

    Features

    • Mould and mildew resistant

    • Neutral cure – Will not corrode concrete or zinc coated / galvanised steel

    • Permanently flexible; ? 20% joint movement

    • Resistance to weathering and UV radiation

    • Resistant to vibration

    • Strong adhesion

    • One part – no mixing

    • Sag resistant –can be used in vertical and over head joints

     

    Areas of Use

    • Sealing around:

    • Showers

    • Bath tubs

    • Sinks

    • Laundries

    • Sealing and weather proofing sanitary ware and spas

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of sealant and adhesive supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Silicone White

    Data Sheet Crommelin Silicone White

  • $82.50

    Crommelin Bitflex 15L Black

    Crommelin Bitflex 15L Black

    Bitflex is a waterborne bitumen emulsion modified with a synthetic rubber co-polymer to provide excellent waterproofing properties and good flexibility. VOC Content of Bitflex is below the maximum VOC Content for Architectural and Interior Sealants as required by Green Star Office Design V2,V3, Office Interiors V1.1, and APAS D181.

     

    Features

    • Quick Drying

    • Flexible

    • Non Flammable

    • Remains watertight under permanently wet conditions

     

    Areas of use

    • Retaining Walls

    • Planter boxes

    • Terracotta pots

    • Gutters

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tradesman so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    http://www.crommelin.com.au/range/industry-and-trade/waterproofing/Bitflex/

     

    Data sheet

     

  • $197.34

    Crommelin Cemproof Flex 35Kg Grey

    Crommelin Cemproof Flex 35kg 2 Part

    Cemproof Flex is a two-component, flexible cementitious waterproofing product ideal for use in both positive and negative side waterproofing applications and for use direct onto damp surfaces. Once applied and cured, CEMPROOF FLEX provides a non-toxic, flexible and waterproof coating with very high adhesion on those common substrates in construction such as concrete, natural and artificial stone, renders, bricks, concrete blocks, etc 
    Component A is a water based acrylic resin and Component B is a mortar, based on a mixture of cements, additives and well-graded aggregates.

     

    Features

    • Provides a fully-flexible coating which ensures waterproofing even in the most severe conditions, resisting high negative water pressure.

    • Excellent adhesion and easy to use. Does not require bonding agents and can be applied on wet surfaces.

    • Resists hydrostatic negative pressure from ground water when used for underground interior application

    • Acts as an anti-fracture membrane between the substrate and other finishing coats applied.

    • Excellent protection for concrete, being both a CO2 and Chlorine barrier and thereby preventing carbonation and electrochemical corrosion.

    • Permeable to water vapour, allows the substrate to breathe.

    • Resistant to abrasion and UV absorption.

    • Withstands atmospheric pollution, corrosive effects of salt water  and freeze/thaw cycles.

    • Non-toxic and chloride-free. Suitable for contact with potable water.

    • Covers shrinkage and hairline cracks of the concrete.

    • Longer lasting that other coatings, avoiding maintenance costs.

    • Environmentally friendly.

     

    Areas of use

    • Waterproofing and protection of water retaining structures, such as drinking water tanks, reservoirs, water mains and swimming pools.

    • Waterproofing of below-grade structures like basements, retaining walls, foundations, tunnels subjected to both positive or negative high water pressure.

    • Waterproofing and protection of concrete against carbonation, and chlorine penetration in public works.

    • Waterproofing balconies, podium decks and where a UV stable abrasion resistant coating is required.

    • Internal and external waterproofing and protection of new and old buildings.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tradesman so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Cemproof Flex

     

    Data Sheet Crommelin Cemproof Flex

  • $28.39

    Crommelin Cemproof Plug 1.25Kg Grey

    Crommelin Cemproof Plug 1.25Kg

    Cemproof Plug is a quick-setting cement based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry. It is non-shrink and sets within three to five minutes depending on the temperature. Once Cemproof Plug sets, it should be over coated with Crommelin® Cemproof Flex.

     

    Features

    • Does not shrink or become weak due to its exothermic reaction.

    • Increases in volume, giving a permanent seal in areas where there is flowing water.

    • Setting time can be controlled by adding warm or cold water. Setting may even be instantaneous by adding hot water during warm weather.

    • Mechanical properties are similar or higher than concrete.

    • Non-toxic, it can be used in contact with drinking water.

    • Sets even underwater.

    • Does not contain chlorides or other corrosive compounds.

       

    Areas of use

    • Basements & Tunnels

    • Concrete Water Pipes

    • Foundations

    • Water Retaining Structures

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tradesman so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    http://www.crommelin.com.au/range/industry-and-trade/waterproofing/cemproof-plug/

     

    Data Sheet

  • $304.89

    Crommelin Cemproof Plug 20Kg Grey

    Crommelin Cemproof Plug 1.25Kg

    Cemproof Plug is a quick-setting cement based mortar that instantly stops running water from cracks, fissures, holes or other openings in concrete and masonry. It is non-shrink and sets within three to five minutes depending on the temperature. Once Cemproof Plug sets, it should be over coated with Crommelin® Cemproof Flex.

     

    Features

    • Does not shrink or become weak due to its exothermic reaction.

    • Increases in volume, giving a permanent seal in areas where there is flowing water.

    • Setting time can be controlled by adding warm or cold water. Setting may even be instantaneous by adding hot water during warm weather.

    • Mechanical properties are similar or higher than concrete.

    • Non-toxic, it can be used in contact with drinking water.

    • Sets even underwater.

    • Does not contain chlorides or other corrosive compounds.

       

    Areas of use

    • Basements & Tunnels

    • Concrete Water Pipes

    • Foundations

    • Water Retaining Structures

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tradesman so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    http://www.crommelin.com.au/range/industry-and-trade/waterproofing/cemproof-plug/

     

    Data Sheet

     

  • $167.94

    Crommelin Catalyst PWC 4L Clear

    Crommelin Catalyst PWC 4L

    Catalyst PWC is a biochemical modified silicate solution that provides long-term waterproofing and durability benefits to concrete. It penetrates into concrete and reacts with free calcium and water to form a water insoluble calcium silicate hydrate gel complex in cracks, pores and capillaries. This gel creates a sub-surface barrier against the ingress of water and contaminants such as chloride ions. Catalyst PWC will seal existing leaking cracks to 2.0mm. In the matrix the product remains active when in contact with water to provide autogenous healing properties to future hairline cracks.

     

    Features

    • Long term performance

    • No re-application or future maintenance required

    • 100% trafficable after the first watering

    • Minimal risk of damage during construction or thereafter

    • Fault finding. If stubborn cracks are present they are easy to find and fix

    • No lifting of membranes required

    • Permanently seals existing cracks to 2.00mm

    • Reseals future hairline cracking

    • Increases surface hardness

    • Allows moisture vapour permeability

    • Suitability for tanking applications (positive hydrostatic pressure).

    Areas of use

    • Building rooftops

    • Car parks

    • Bridge decks

    • Wharf decks Podium decks

    • Airport runways, taxiways and aprons

    • Potable water tanks

    • Viaducts

    • Water treatment works

    • Cut and cover tunnels

    • Rendered surfaces, e.g.: over block work and brickwork

    • Façades

    • Precast elements & panel

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tradesman so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website

    Crommelin Catalyst PWC

     

    Data Sheet Crommelin Catalyst PWC

  • $629.77

    Crommelin Catalyst PWC 15L Clear

    Crommelin Catalyst PWC 4L

    Catalyst PWC is a biochemical modified silicate solution that provides long-term waterproofing and durability benefits to concrete. It penetrates into concrete and reacts with free calcium and water to form a water insoluble calcium silicate hydrate gel complex in cracks, pores and capillaries. This gel creates a sub-surface barrier against the ingress of water and contaminants such as chloride ions. Catalyst PWC will seal existing leaking cracks to 2.0mm. In the matrix the product remains active when in contact with water to provide autogenous healing properties to future hairline cracks.

     

    Features

    • Long term performance

    • No re-application or future maintenance required

    • 100% trafficable after the first watering

    • Minimal risk of damage during construction or thereafter

    • Fault finding. If stubborn cracks are present they are easy to find and fix

    • No lifting of membranes required

    • Permanently seals existing cracks to 2.00mm

    • Reseals future hairline cracking

    • Increases surface hardness

    • Allows moisture vapour permeability

    • Suitability for tanking applications (positive hydrostatic pressure).

    Areas of use

    • Building rooftops

    • Car parks

    • Bridge decks

    • Wharf decks Podium decks

    • Airport runways, taxiways and aprons

    • Potable water tanks

    • Viaducts

    • Water treatment works

    • Cut and cover tunnels

    • Rendered surfaces, e.g.: over block work and brickwork

    • Façades

    • Precast elements & panel

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tradesman so if you are looking for the right tradesmen for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website

    Crommelin Catalyst PWC

     

    Data Sheet Crommelin Catalyst PWC

  • $187.00

    Crommelin Elastoseal HD 15L Black

    Crommelin Elastoseal® HD 15L 

    Elastoseal® HD is a tough elastomeric tanking membrane. It consists of heavy duty, waterborne modified neoprene that may be reinforced with a non-woven polyester fabric. Elastoseal® HD is a composite seamless membrane designed for waterproofing areas subject to ponding and immersion. VOC Content of Elastoseal® HD is below the maximum VOC Content for Architectural and Interior Sealants as required by Green Star Office Design V2, V3, Office Interiors V1.1, and APAS D181.

     

    Features

    • 1300% elongation to allow structural movements

    • Excellent adhesion to substrates

    • Good chemical resistance

    • Easy to repair

    • Reinforce for mechanical strength & puncture resistance

    • Water run-off is non-toxic

    • Remains permanently elastic

    • Does not contain isocyanates

    • 24 hour cure

     

    Areas of use

    • Basement car parks

    • Plaza areas

    • Retaining walls

    • Landscaped decks

    • Planter boxes

    • Grey water & sewerage tanks

    • Roof areas subject to regular ponding

    • Decorative pools

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coating specialist for your job we can connect you without delay.

     

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Elastoseal HD

     

    Data Sheet Crommelin Elastoseal HD

  • $187.00

    Crommelin Elastoseal MPU LV 19Kg Grey

    Elastoseal® MPU LC 19Kg

    Elastoseal® MPU is a solvent borne, high performance, moisture cure, elastomeric polyurethane waterproofing membrane, specifically engineered for use under screeds and other non-exposed and non-trafficable surfaces.
    Note: It is not recommended to adhere tiles directly to Elastoseal® MPU.

     

    Features

    • Economical premium performance

    • Class 111 membrane to AS4858

    • Very high elongation, up to 690%

    • Excellent adhesion to substrate

    • High strength, chemical and puntcure resistance

    • Low VOC and low odour

    • Fast tack free surface

    • Permanently flexible with excellent crack bridging capability

    • Available in normal and low viscosity grades

     

    Areas of use

    • Podium decks and balconies

    • Roof gardens and terraces

    • Internal wet areas (under screed only)

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coating specialist for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Elastoseal MPU

     

    Data Sheet Crommelin Elastoseal MPU

  • $225.50

    Crommelin Elastoseal PU Planter 19Kg Black

    Crommelin Elastoseal® PU Planter 19Kg

    Elastoseal® PU Planter is a solvent borne, high performance, moisture cure, elastomeric polyurethane waterproofing membrane, specifically engineered for use inside planter boxes and other non-exposed and non-trafficable surfaces such as retaining walls.

    Note: It is not recommended to adhere tiles directly to Elastoseal® PU Planter.

     

    Features

    • Monolithic membrane – no lap, wield or seams.

    • Low VOC, complies with Green Star requirements.

    • Quick tack-free surface.

    • High resistance to root puncture, fouling and stagnant water.

    • High elongation, class III membrane.

    • No reinforcement required.

    • Excellent crack bridging capability.

    • Remains flexible at low temperatures

     

    Areas of Use

    • Planter Boxes

    • Roof Gardens & Terraces

    • Retaining walls

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coating specialist for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Elastoseal PU Planter

     

    Data Sheet Crommelin Elastoseal PU Planter

  • $253.00

    Crommelin Elastoseal PUV 19Kg Grey

     

    Crommelin Elastoseal® PUV 19Kg

     

    Elastoseal® PUV is a high performance, hand-applied, low VOC, moisture-curing single-pack elastomeric polyurethane waterproofing membrane. Elastoseal® PUV is directly foot-trafficable

     

     

     

    Features

     

    • Class 111 membrane to AS4858

    • Meets requirements for AS4564.1

    • Very high long term UV resistance

    • Highly durable, foot trafficable surface

    • Excellent adhesion to substrattes

    • High strength, chemical and puncture resistance

    • Low VOC and low odor

    • Fast tack free surface

    • Permanently flexible with excellent crack bridging capability

     

     

     

    Areas of Use

     

    • Podium decks and balconies

    • Roof gardens and terraces

    • Gutters and balconies

     

     

     

    wettrades.com

     

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coating specialist for your job we can connect you without delay.

     

     

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

     

     

     

    Crommelin Elastoseal PUV

     

     

     

    Data Sheet Crommelin Elastoseal PUV

     

  • $429.00

    Crommelin Elastoseal PUV Shield 15Kg Grey

     

    Crommelin Elastoseal® PUV Shield 15Kg

     

    Elastoseal® PUV Shield is a high performance, hand-applied, low VOC, moisture-curing single-pack elastomeric polyurethane top coat for Elastoseal® PUV. Elastoseal® PUV Shield is vehicle and foot-trafficable due to its high hardness.

     

     

     

    Features

     

    • Class III membrane

    • Meets standard AS/NZ 4858

    • Excellent crack bridging capability

    • Elastomeric behavior: remains flexible at low temperatures

    • Single-pack: no mixing, ready to use

    • Quick tack-free surface

    • High resistance to chemicals

    • >150% elongation

    • Low VOC, complies with Green Star requirements

     


    Areas of Use

     

    Podium decks and balconies

     

    • Roof gardens and terraces

    • Gutters and balconies

     

     

     

    wettrades.com

     

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coating specialist for your job we can connect you without delay.

     

     

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

     

     

    Crommelin Elastoseal PUV Sheild

     

     

     

    Data Sheet Crommelin Elastoseal PUV Shield

     

     

     

  • $187.00

    Crommelin Elastoseal TR 15L Grey

     

    Crommelin Elastoseal® TR 15L

     

    Elastoseal®TR is a high performance synthetic rubber-based membrane, designed to offer waterproofing to areas subjected to permanent immersion and internal pedestrian traffic. Elastoseal® TR used under screeds or toppings is capable of accommodating expected structural movement. When used in combination with a reinforcing fabric, exhibits outstanding toughness and resistance to puncture. VOC Content of Elastoseal® TR is below the maximum VOC Content for Architectural and Interior Sealants as required by Green Star Office Design V2, V3, Office Interiors V1.1, and APAS D181.

     

     

    Features

     

    • Suitable for collecting & storage of drinking water 

    • Suitable for pedestrian traffic 

    • High permanent elongation to accommodate thermal and structural movement 

    • Excellent crack bridging properties 

    • May be reinforced for increased puncture resistance 

    • Safe and easy to use 

    • Quick drying 

    • Excellent adhesion to substrates

     

     

    Areas of Use

     

    • Roofs, gutters 

    • Podium deck areas 

    • Roof gardens 

    • Balconies and terrace areas 

    • Concrete, cement render 

    • Plywood & cement fibreboard 

    • Brick & light weight aggregate block 

    • Steel and aluminium

     

     

    wettrades.com

     

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coating specialist for your job we can connect you without delay.

     

     

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

     

     

    Crommelin Elastoseal TR

     

     

     

    Data Sheet Crommelin Elastoseal TR

     

  • $165.00

    Crommelin Pond Sealer 15L

    Crommelin Pond Sealer Clear 15L

     

    Pond Sealer Clear is a seamless clear sealer, designed for waterproofing new or renovated fish ponds and water features. Suitable for surfaces and structures that will not experience movement, Pond Sealer Clear will remain watertight under permanently wet conditions. Where there are pre-existing holes, cracks or expected movement, use one of the Pond Sealer Colour membranes.

     

    Features

    • Non-toxic and safe for fish and plants

    • Safe and easy to apply

    • Excellent adhesion to substrates

    • Quick drying

    • Easy to repair

    • UV Stable

     

    Areas of Use

    • Fish ponds

    • Ornamental water features

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coating specialist for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing & Sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Pond Sealer

     

    Data Sheet Crommelin Pond Sealer

     

  • $16.50

    Crommelin Under-tile Floor Screed 20Kg Grey

    Crommelin Premixed Under-tile Floor Screed 20Kg

    Crommelin® Premixed Under-tile Floor Screed is a ready to use, premium, polymer modified screed mix, formulated for use in all under tile applications.

    Crommelin® Premixed Under-tile Floor Screed is uniquely waterproof and efflorescence free, providing protection from water damage, whilst preventing the upward movement of rising white mineral salts.

    Crommelin® Premixed Under-tile Floor Screed is formulated for use in conjunction with Crommelin®Shower Waterproofing Membrane and all other Crommelin® Under-tile Waterproofing Membranes.

     

    Features

     

    • Ready to use, easy to mix and place.

    • Waterproof formula.

    • Efflorescence free – no rising white salts.

    • Non-shrink.

    • Consistent batching – the right mix every time.

    • Internal and external application.

    • Efficient application – saves time on site.

    • Yield per bag – 1m2 at 10mm.

    • Application thickness – feather edge to 100mm

     

    Areas of Use

    • Showers.

    • Bathrooms.

    • Balconies.

    • Patios.

    • Laundries.

    • Wetrooms etc.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable tilers so if you are looking for the right specialist for your job we can connect you without delay.

    This product is part of our large selection of Building Material supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Under-tile floor screed

    Data Sheet Crommelin Under-tile floor screed

  • $110.00

    Crommelin WB2K P1 4L Grey

    Crommelin WB2K Part 1 4L

    WB2K is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier. VOC Content of WB2K is below the maximum VOC Content for Architectural and Interior Sealants as required by Green Star Office Design V2, V3, Office Interiors V1.1.

     

    Features

    • Tough impervious coating with a low/semi gloss finish

    • Excellent adhesion to damp or dry surfaces

    • High chemical resistance, including oils, fats and solvents

    • Simple to use with 1:1 mixing ratio

    • Non-toxic and non-flammable

    • Easily cleaned up with water

    • Easy to apply by brush, roller or spray

    • Chemical resistant

     

    Areas of Use

    • Controlling rising damp prior to application of:
      •    Waterproofing membranes
      •    Other coatings

    • Coating of concrete floors in:
      •    Workshops
      •    Food Processing
      •    Hospitals & Laboratories

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of waterproofing and sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin WB2K

     

    Data Sheet Crommelin WB2K

     

     

  • $198.00

    Crommelin WB2K P1 10L Grey

    Crommelin WB2K Part 1 10L

    WB2K is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier. VOC Content of WB2K is below the maximum VOC Content for Architectural and Interior Sealants as required by Green Star Office Design V2, V3, Office Interiors V1.1.

     

    Features

    • Tough impervious coating with a low/semi gloss finish

    • Excellent adhesion to damp or dry surfaces

    • High chemical resistance, including oils, fats and solvents

    • Simple to use with 1:1 mixing ratio

    • Non-toxic and non-flammable

    • Easily cleaned up with water

    • Easy to apply by brush, roller or spray

    • Chemical resistant

     

    Areas of Use

    • Controlling rising damp prior to application of:
      •    Waterproofing membranes
      •    Other coatings

    • Coating of concrete floors in:
      •    Workshops
      •    Food Processing
      •    Hospitals & Laboratories

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of waterproofing and sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin WB2K

     

    Data Sheet Crommelin WB2K

     

  • $110.00

    Crommelin WB2K P2 4L Grey

    Crommelin WB2K Part 2 4L

    WB2K is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier. VOC Content of WB2K is below the maximum VOC Content for Architectural and Interior Sealants as required by Green Star Office Design V2, V3, Office Interiors V1.1.

     

    Features

    • Tough impervious coating with a low/semi gloss finish

    • Excellent adhesion to damp or dry surfaces

    • High chemical resistance, including oils, fats and solvents

    • Simple to use with 1:1 mixing ratio

    • Non-toxic and non-flammable

    • Easily cleaned up with water

    • Easy to apply by brush, roller or spray

    • Chemical resistant

     

    Areas of Use

    • Controlling rising damp prior to application of:
      •    Waterproofing membranes
      •    Other coatings

    • Coating of concrete floors in:
      •    Workshops
      •    Food Processing
      •    Hospitals & Laboratories

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of waterproofing and sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin WB2K

     

    Data Sheet Crommelin WB2K

  • $198.00

    Crommelin WB2K P2 10L Grey

    Crommelin WB2K Part 2 10L

    WB2K is a two component waterborne epoxy sealer that combines the excellent adhesion and toughness of epoxy resins with the advantages of using water as a carrier. VOC Content of WB2K is below the maximum VOC Content for Architectural and Interior Sealants as required by Green Star Office Design V2, V3, Office Interiors V1.1.

     

    Features

    • Tough impervious coating with a low/semi gloss finish

    • Excellent adhesion to damp or dry surfaces

    • High chemical resistance, including oils, fats and solvents

    • Simple to use with 1:1 mixing ratio

    • Non-toxic and non-flammable

    • Easily cleaned up with water

    • Easy to apply by brush, roller or spray

    • Chemical resistant

     

    Areas of Use

    • Controlling rising damp prior to application of:
      •    Waterproofing membranes
      •    Other coatings

    • Coating of concrete floors in:
      •    Workshops
      •    Food Processing
      •    Hospitals & Laboratories

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of waterproofing and sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin WB2K

     

    Data Sheet Crommelin WB2K

  • $44.19

    Crommelin Polyfab 150mm

    Crommelin Polyfab 150mm

    Polyfab is a non woven, rot proof polyester fabric for use in conjunction with liquid waterproofing membranes. It is easier to wet out and it possesses superior flexibility to materials such as fibreglass

     

    Features

    • Bridges gaps 

    • Strengthens membranes by increasing tensile strength and puncture resistance 

    • Flexible Easy to wet out 

    • Outstanding conformability 

    • High grab tensile strength

     

    Areas of Use

    • Gutters 

    • Roof Areas 

    • Flashings 

    • Cracks in substrates

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of waterproofing and sealing supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Poly Fab

    Data Sheet Crommelin Poly Fab

     

  • $6.60

    Crommelin Silicone WP Plus 300G Grey

    Crommelin Silicone WP Plus 300G Grey

    Crommelin Silicone WP Plus is a premium, neutral cure silicone sealant engineered for use in kitchens, bathrooms, wet areas and as a bond breaking sealant in waterproofing applications.

     

    Features

    • Mould and mildew resistant

    • Neutral cure – Will not corrode concrete or zinc coated / galvanised steel

    • Permanently flexible;  20% joint movement

    • Resistance to weathering and UV radiation

    • Resistant to vibration

    • Strong adhesion

    • One part – no mixing

    • Sag resistant –can be used in vertical and over head joints

     

    Areas of Use

    • Sealing around:

    • Showers

    • Bath tubs

    • Sinks

    • Laundries

    • Sealing and weather proofing sanitary ware and spas

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of sealant and adhesive supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Silicone Grey

    Data Sheet Crommelin Silicone Grey

  • $6.60

    Crommelin Silicone WP Plus 300G Translucent

    Crommelin Silicone WP Plus 300G Grey

    Crommelin Silicone WP Plus is a premium, neutral cure silicone sealant engineered for use in kitchens, bathrooms, wet areas and as a bond breaking sealant in waterproofing applications.

     

    Features

    • Mould and mildew resistant

    • Neutral cure – Will not corrode concrete or zinc coated / galvanised steel

    • Permanently flexible; ? 20% joint movement

    • Resistance to weathering and UV radiation

    • Resistant to vibration

    • Strong adhesion

    • One part – no mixing

    • Sag resistant –can be used in vertical and over head joints

     

    Areas of Use

    • Sealing around:

    • Showers

    • Bath tubs

    • Sinks

    • Laundries

    • Sealing and weather proofing sanitary ware and spas

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of sealant and adhesive supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

    Crommelin Silicone Grey

    Data Sheet Crommelin Silicone Grey

  • $9.90

    Soudal Sealant 600ml Concrete Grey

    Soudal Multibond SMX35 Seal & Stretch Concrete Grey 300ml

     

    DESCRIPTION

    Multibond SMX35 is a high quality, single component, permanently flexible joint sealant. Perfect for internal & external applications. Based on SMX® Polymer Multibond SMX35 has a “Shore A” hardness of 35 and can accommodate movement of ± 20 %. Multibond SMX35 has excellent UV resistance, elasticity and can be sanded and painted with most types of paint. Once cured forms a strong, flexible, waterproof seal and bonds to the widest range of substrates. Multibond SMX35 can be used for damp and wet surfaces.

     

    APPLICATIONS

    Multibond SMX35 – Seal & Stretch is ideal for a wide range of sealing applications in construction and industrial including…..

    • Expansion joints

    • Joints under waterproofing membranes (water-based, solvent-based and acrylic)

    • Masonry and precast concrete joints

    • For sanitary, bathroom and kitchen areas (resists mould growth)

    • For walls and perimeter joints

    • For water retaining structures (Concrete Grey water potable approved)

    • For lap joints in roofing, guttering and cladding,

    • For air conditioning ducting,

    • For caravan, bus and automotive use

    • For window and door frames.

     

    FEATURES & BENEFITS

    • Elastic sealant

    • Highly flexible ±20%

    • Internal & external

    • Multipurpose

    • UV Resistant

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable applicators so if you are looking for the right coatings specialist we can connect you without delay.

    This product is part of our large selection of sealant and adhesive supplies and you can find more information and data sheets on this product by following the links to the Crommelin website.

     

     

    Soudal Sealant

    Tech Data Soudal Sealant

    MSDS Soudal Sealant

     

  • $66.00

    Mapei Plastimul 12kg

    Mapei PLASTIMUL 12Kg

    Bitumen waterproofing emulsion for general purpose use.
    Plastimul is used for waterproofing horizontal and vertical surfaces, such as foundations, retaining walls, layers beneath tiles, etc. Due to its bonding characteristics, Plastimul may be used to attach insulating materials such as cork, rock-wool, etc.
    Plastimul is a aqueous emulsion of a high-quality, bitumen paste, and is completely solvent-free. For waterproofing applications, spread on a number of layers of Plastimul until the required thickness is achieved.
    Once dry, Plastimul forms a plastic layer which is resistant to water.

    Consumption
    ca. 1 kg/m2 for waterproofing vertical surfaces.

    Packaging
    30 and 12 kg buckets.


    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Tiler’s so if you are looking for the right tradesman for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing and sealant range and you can find more information and data sheets on this product by following the links to the MAPEI website.

     

    Mapei Plastimul

    Tech Data Mapei Plastimul

  • $121.00

    Mapei Plastimul 20kg

    Mapei PLASTIMUL 20Kg

    Bitumen waterproofing emulsion for general purpose use.
    Plastimul is used for waterproofing horizontal and vertical surfaces, such as foundations, retaining walls, layers beneath tiles, etc. Due to its bonding characteristics, Plastimul may be used to attach insulating materials such as cork, rock-wool, etc.
    Plastimul is a aqueous emulsion of a high-quality, bitumen paste, and is completely solvent-free. For waterproofing applications, spread on a number of layers of Plastimul until the required thickness is achieved.
    Once dry, Plastimul forms a plastic layer which is resistant to water.

    Consumption
    ca. 1 kg/m2 for waterproofing vertical surfaces.

    Packaging
    30 and 12 kg buckets.


    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Tiler’s so if you are looking for the right tradesman for your job we can connect you without delay.

     

    This product is part of our large selection of Waterproofing and sealant range and you can find more information and data sheets on this product by following the links to the MAPEI website.

     

    Mapei Plastimul

    Tech Data Mapei Plastimul

  • $176.00

    Mapei Mapegum WPS 25kg

    Mapei MAPEGUM WPS 25Kg

    Fast drying flexible liquid membrane for interior waterproofing. Applications: Liquid waterproofing membrane for interior surfaces provided they are not continually immersed in water or subject to rising damp. Mapegum WPS can be used on all types of substrates such as: gypsum board walls, gypsum and cementitious renders, light-weight concrete blocks, wood, existing ceramic tiles, cementitious and anhydrite substrates, wood substrates, magnesite, hot poured asphalt. Waterproofer for bathroom and shower walls and floors before installing ceramic tiles and natural stone; waterproofing kitchen floors and walls and counter tops before installing ceramic tiles. N.B.: Mapegum WPS has been certified by the following institutes as a waterproofing membrane for damp environments, to be applied underneath tiled surfaces. – Säurefliesner (Germany): tested in accordance with current standards. – SP Swedish National Testing & Research Institute (Sweden): tested in accordance with BKR Standards (Building Ceramics Council). – Norwegian Research & Building Institute: tested in accordance with current standards. Technical data: Formation of surface skin: 1 hour. Complete drying (2 mm of thickness at 23ºC): 5 hours. Waiting time: 1-2 hours between each coat; 12-24 hours before laying ceramic. Colour: light grey.

     

    Application: by trowel, with a roller or by spraying. Storage: 24 months. Protect from frost. Consumption 1.5 kg/m2 per mm of thickness. Packaging 5, 10 and 25 kg drums.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Tiler’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Waterproofing and sealant range and you can find more information and data sheets on this product by following the links to the MAPEI website.

     

    Mapei Mapegum

    Tech Data Mapei Mapegum

    MSDS Mapei Mapegum

     

  • $33.00

    Mapei Lamposilex 5kg

    Mapei LAMPOSILEX 5Kg

    Ultra fast setting and drying hydraulic binder for plugging water leaks.
    Use Lamposilex to plug any source of water, even under pressure, in basements, tunnels, subways etc. and for sealing watertight rigid joints in hydraulic concrete structures, sewers, tanks and canals. Where seepage is present Lamposilex must be used before waterproofing with Idrosilex Pronto.
    Once mixed with water Lamposilex forms a paste with a plastic consistency that sets in about 2 minutes.
    Preparing the mix: pour 1 kg of Lamposilex into a bucket containing 280 grams of water while mixing very vigorously with a hand trowel until a homogeneous paste is obtained. For measures by volume, mix 2.5 parts of Lamposilex with 1 part of water. 
    Immediately apply the Lamposilex using a gloved hand.
    Consumption:
    1.8 kg per litre of cavity to be filled.
    Packaging:
    5 kg drums.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Tiler’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Waterproofing and sealant range and you can find more information and data sheets on this product by following the links to the MAPEI website.

     

    Mapei Lamposilex

    Tech Data Mapei Lamposilex

    MSDS Mapei Lamposilex