Welcome to WetTrades!
(03) 9555 4108 info@wettrades.com
  • $2.00

    BS Aluminium Angle 2.7M

    Buildsmart Aluminium Angles 2.7M 

    Made in Poland using only high grade aluminium material. As manufacturers Buildsmart guarantees the quality of its aluminum angles against rust, rust damage and rust corrosion in all acrylic base render applications. Our aluminium angles are certified for external application in all environments. This includes extreme environments such as: high humidity, industrial pollution, and air borne salt particles and seashore residences. Depending on how you install the angle, you can build the render from 2.5mm thickness to 12mm.

    Installation:
    Aluminium Render-Lock corner beads should be imbedded into the acrylic base coat.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of render materials, you can find more information on this product by following the link below.

    Aluminium Angles 2.7M

     

     

  • $2.30

    BS Aluminium Angle 3M

    Buildsmart Aluminium Angles 3M

    Made in Poland using only high grade aluminium material. As manufacturers Buildsmart guarantees the quality of its aluminum angles against rust, rust damage and rust corrosion in all acrylic base render applications. Our aluminium angles are certified for external application in all environments. This includes extreme environments such as: high humidity, industrial pollution, and air borne salt particles and seashore residences. Depending on how you install the angle, you can build the render from 2.5mm thickness to 12mm.

    Installation:
    Aluminium Render-Lock corner beads should be imbedded into the acrylic base coat.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of render materials, you can find more information on this product by following the link below.

    Aluminium Angles 3M

  • Placeholder
    $3.00

    BS Aluminium Casing Bead ADD SPECS

  • $3.50

    iQuip Aluminium Angle w Mesh 2.7M

    Aluminium corner bead with mesh designed to be used for external render application, EPS and Hebal systems. Provides great cover for EPS and Hebal corner joints. Often used to repair existing facade for example to cover corners to fix cracked or cracking corners. Reinforces corners in places of excessive stress. Prevents hairline cracking and strengthens the corner. Also certified for use on seashore residencies and other extreme environments.

  • $3.70

    iQuip Aluminium Angle w Mesh 3M

    Aluminium corner bead with mesh designed to be used for external render application, EPS and Hebal systems. Provides great cover for EPS and Hebal corner joints. Often used to repair existing facade for example to cover corners to fix cracked or cracking corners. Reinforces corners in places of excessive stress. Prevents hairline cracking and strengthens the corner. Also certified for use on seashore residencies and other extreme environments.

  • Placeholder
    $4.00

    iQuip Galvanised Angles w. Primer 3M

    Galvanised angle with primer coating. 

  • $18.00

    Mac FR Render 20kg

    MACRENDER COARSE FR

    Coarse grade fibre-reinforced cementitious render for application to aerated concrete blocks & panels.

     

    KEY FEATURES

    • Synthetic fibre reinforced for improved crack resistance

    • Increased redispersible polymer concentration for enhanced adhesion

    • Just add water

    • Factory blended for optimum consistency

    • Excellent durability 

    • Improved wokability and application properties

    • Will not go drummy like traditional sand and cement renders

     

    SUITABLE APPLICATIONS

    • Aerated (AAC) concrete blocks & panels

     

    COMPOSITION

    • Type HE off white portland cement

    • Synthetic fibres

    • Graded silica sands

    • Redispersible polymer powders

    • Workability additives

    • Water retention agents for improved hydration

     

    COVERAGE

    • Approximately 3-5 square metres per 20 kg bag

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 20 kg paper sacks

    • 60 x 20 kg sacks per pallet lot

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render FR

    Tech Data Mac Render FR

    MSDS Mac Render FR Render

     

  • Placeholder

    Mac HBS 20kg

  • $18.00

    Mac HBS Render 20kg

    MACRENDER HBS Render 20kg

    High bond strength, medium grade cementitious render for application to low porosity surfaces.

     

    KEY FEATURES

    • High polymer modification for excellent bond strength

    • Just add water

    • Factory blended for optimum consistencyExcellent durability 

    • Improved wokability and application properties

    • Will not go drummy like traditional sand and cement renders

     

    SUITABLE APPLICATIONS

    • Painted masonry based surfaces

    • Expanded polystyrene (EPS) base sheet

    • Rigid thermoset phenolic EIFS systems eg. Kooltherm or Masterwall K-Series

    • See Render Selector for details

     

    COMPOSITION

    • Type HE off white portland cement

    • Graded silica sands

    • Redispersible polymer powders

    • Workability additives

    • Water retention agents for improved hydration

     

    COVERAGE

    • Approximately 3-5 square metres per 20 kg bag

     

    CLEAN UP

    • Clean tools immediately following use as hardened material will prove difficult to remove

     

    PACKAGING

    • 20 kg paper sacks

    • 60 x 20 kg sacks per pallet lot

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render HBS Render

    Tech Data Mac Render HBS Render

    MSDS Mac Render HBS Render

     

     

  • $10.00

    Mac Medium Render 20kg

    MACRENDER Medium Render 20kg

    Medium grade cementitious render for application to stable and porous masonry surfaces.

     

    KEY FEATURES

    • Just add water

    • Factory blended for optimum consistency

    • Excellent durability 

    • Improved wokability and application properties

    • Will not go drummy like traditional sand and cement renders

     

    SUITABLE APPLICATIONS

    • Stable and porous masonry surfaces 

     

    COMPOSITION

    • Type HE off white portland cement

    • Graded silica sands

    • Redispersible polymer powders

    • Workability additives

    • Water retention agents for improved hydration

     

    COVERAGE

    • Approximately 3-5 square metres per 20 kg bag

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 20 kg paper sacks

    • 60 x 20 kg sacks per pallet lot

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render Medium Render

    Tech Data Mac Render Medium Render

    MSDS Mac Render Medium Render

     

  • $52.00

    Mac Render 1140 Medium Texture 15L

    Mac Render 1140 SANDFINISH Medium Texture 15L

    Medium grade acrylic based architectural finish formulated for trowel application.

     

    KEY FEATURES

    • Excellent durability

    • Tintable to almost any colour

     

    COLOUR RANGE

    • Most non metallic colours, pastel, through deep base.

    • Some ultra deep/bright colours may not be possible.

    • Some colours may not be suitable for exterior use.

     

    COMPOSITION

    • Premium acrylic copolymer

    • Marble aggregates

    • Mould & fungus inhibitors

    • Premium pigments & fillers

     

    COVERAGE

    • Approximately 10-12 square metres / 15 litre pail

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 15 Litre plastic pails

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable renderer so if you are looking for the right tradesman for your job we can connect you without delay.

     

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render 1140 Medium Texture

     

    Tech Data Mac Render 1140 Medium Texture

     

    MSDS Mac Render 1140 Medium Texture

     

    Swatches Mac Render 1140 Medium Texture

     

     

  • $52.00

    Mac Render 3060 Fine Texture 15L

    Mac Render 3060 SANDSTONE Fine Texture 15L

    Fine grade acrylic based architectural finish formulated for trowel application.

     

    KEY FEATURES

    • Excellent durability

    • Tintable to almost any colour

     

    COLOUR RANGE

    • Most non metallic colours, pastel, through deep base.

    • Some ultra deep/bright colours may not be possible.

    • Some colours may not be suitable for exterior use.

     

    COMPOSITION

    • Premium acrylic copolymer

    • Marble aggregates

    • Mould & fungus inhibitors

    • Premium pigments & fillers

     

    COVERAGE

    • Approximately 12-15 square metres / 15 litre pail

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 15 Litre plastic pails

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

     

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render 3060 Fine Texture

    Tech Data Mac Render 3060 Fine Texture

    MSDS Mac Render 3060 Fine Texture

    Swatches for Mac Render 3060 Fine Texture

     

  • $22.00

    Mac Render Dri Texture 20kg

    Mac Render DRI-TEX 20Kg

    Polymer modified, cement based textured finish providing an economical and durable alternative to acrylic products

     

    KEY FEATURES

    • Easily prepared, Just add water and apply.

    • Cement based for excellent durability

    • Economical alternative to acrylic finishes

    • Marble based aggregates for optimum purity

     

    COLOUR RANGE

    • Natural white.

    • Designed to be painted in any colour with an exterior grade paint such as MAC Satin

     

    COMPOSITION

    • Portland cement conforming to Australian Standards

    • Workability and moisture retention agents

    • Specially graded marble aggregates

     

    COVERAGE

    • Approximately 12 square metres per 20 kg bag

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 20 kg paper sacks

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render Dri Texture

    Tech Data Mac Render Dri Texture

    MSDS Mac Render Dri Texture

    Swatches Mac Render Dri Texture

     

  • $11.00

    Mac Render High Build Render 16Kg

    Mac Render HI-BUILD Render 16Kg

    Lightweight polymer modified cementitious render formulated for thick section application.

     

    KEY FEATURES

    • Just add water

    • Lightweight for improved sag resistance

    • Factory blended for optimum consistency

    • Excellent durability 

    • Improved wokability and application properties

    • Will not go drummy like traditional sand and cement renders

     

    SUITABLE APPLICATIONS

    • Stable and porous masonry surfaces

    • Rough surfaces requiring a thicker render coat

     

    COMPOSITION

    • Type HE off white portland cement

    • Graded silica sands

    • Lightweight aggregates

    • Redispersible polymer powders

    • Workability additives

    • Water retention agents for improved hydration

     

    COVERAGE

    • Approximately 1-3 square metres per 16 kg bag

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 16 kg paper sacks

    • 60 x 16 kg sacks per pallet lot

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render High Build

    Tech Data Mac Render High Build Render

    MSDS Mac Render High Build Render

     

  • $55.00

    Mac Render Mac Bond 10L

    Mac Render MACBOND 10L

    High performance polymer additive formulated to improved the properties of cement based mixes.

     

    KEY FEATURES

    • Improves tensile bond strength

    • Improves flexibilty

    • Undiluted (unlike most commercially available products)

     

    SUITABLE APPLICATIONS

    • Add to cement based renders and tile adhesives to improve performance properties

     

    COMPOSITION

    • Acrylic copolymer (undiluted)

    • 58% solids by weight

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 4, 10 & 20 litre plastic jerry cans

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render Mac Bond

    Tech Data Mac Render Macbond 10L

    MSDS Mac Render Mac Bond 10L

     

     

  • $30.00

    Mac Render Mac Bond 4L

    Mac Render MACBOND 4L

    High performance polymer additive formulated to improved the properties of cement based mixes.

     

    KEY FEATURES

    • Improves tensile bond strength

    • Improves flexibilty

    • Undiluted (unlike most commercially available products)

     

    SUITABLE APPLICATIONS

    • Add to cement based renders and tile adhesives to improve performance properties

     

    COMPOSITION

    • Acrylic copolymer (undiluted)

    • 58% solids by weight

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 4, 10 & 20 litre plastic jerry cans

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render Mac Bond

    Tech Data Mac Render Macbond

    MSDS Mac Render Mac Bond

     

  • $31.82

    Mac Render Suede 16Kg

    Mac Render SUEDE FC 15Kg

    Ultra fine cement based fairing coat for achieving a concrete slab appearance.

     

    KEY FEATURES

    • Ultra fine finish

    • Polymer modification for improved adhesion

    • Cement base provides long term durability

     

    COLOUR RANGE

    • Natural Grey

    • Natural White

     

    COMPOSITION

    • Premium acrylic copolymer

    • Portland cement conforming to Australian Standards

    • Workability and moisture retention agents

     

    COVERAGE

    • Between 5-10 square metres per 15 kg bag

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 15 kg paper sacks

    • 60 x 15 kg sacks per pallet lot

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render Suede 

    Tech Data Mac Render Suede

    MSDS Mac Render Suede

    Swatches Mac Render Suede

  • Placeholder

    Mac Suede

  • $9.00

    Mac SupaSkim Fine Render 20kg

    Mac Render SUPASKIM Fine Render 20kg

    Fine grade cementitious render ideal for sponge finish prior to painting. 

     

    KEY FEATURES

    • Just add water

    • Factory blended for optimum consistency

    • Excellent durability 

    • Improved wokability and application properties

    • Will not go drummy like traditional sand and cement renders

     

    SUITABLE APPLICATIONS

    • Stable and porous masonry surfaces (see Render Selector)

     

    COMPOSITION

    • Type HE off white portland cement

    • Graded silica sands

    • Redispersible polymer powders

    • Workability additives

    • Water retention agents for improved hydration

     

    COVERAGE

    • Approximately 3-5 square metres per 20 kg bag

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 20 kg paper sacks

    • 60 x 20 kg sacks per pallet lot

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render Supakim Fine Render

    Tech Data Mac Render Supaskim Fine Render

    MSDS Mac Render Supaskim Fine Render

  • $42.00

    Mac Wet Patch Coarse 22kg

    Mac Render MACPATCH WET PATCH COARSE 15L

    Medium grade joint stopping compound and skim coat for application to fibre cement sheet constructions. 

     

    KEY FEATURES

    • Highly flexible

    • Excellent adhesion

    • Low shrinkage

    • Pre-mixed for convienience 

    • Mix with 5-10% cement prior to use

     

    SUITABLE SURFACES

    • Fibre cement base sheet

     

    COMPOSITION

    • Premium acrylic copolymer

    • Mould & fungus inhibitors

    • Premium pigments & fillers

     

    COVERAGE

    • JOINT STOPPING: Approximately 50 lineal metres / 15 litre pail

    • SKIMCOATING: Approximately 12-14 square metres / 15 litre pail 

     

    CLEAN UP

    • Water

     

    PACKAGING

    • 4 & 15 litre plastic pails

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Mac Render website.

     

    Mac Render Wet Patch Coarse

    Tech Data Mac Render Wet Patch Coarse

    MSDS Mac Render Wet Patch Coarse

     

  • Placeholder
    $17.76

    Orange Board Render 20Kg

    Orange Board Render 20Kg

    Part of the EPS RMAX Orange Board system

     

    A complete, fully compliant system
    The RMAX Orange Board® System comprises board, primer, render, mesh and fixing accessories specifically designed to complement each other at every stage of construction.

    Lightweight, easy to install
    The lightweight, rigid construction of RMAX Orange Board® enables it to be easily transported, unloaded and maneuvered onto any building site, contributing to fast construction times and reduced construction costs. 
    Sheets can be easily carried by one person.

    Strength
    Tested and exceeds the requirements of BCA P2.1 – Wind Action and P2.2.2 – Weather Proofing. The unique qualities of RMAX Orange Board® allow it to be easily cut without loss of strength.

    Design versatility
    RMAX Orange Board® can be used on a wide spectrum of building styles where excellent thermal qualities are required. 
    It is ideally suited where weight and insulation are important such as second floor installations. 
    RMAX Orange Board® is suitable for straight and curved applications. 

    Environmentally friendly
    RMAX Orange Board® is made from RMAX Expanded Polystyrene (EPS), one of the most environmentally friendly products on earth. 
    It is non toxic and odourless, biologically inert and contains no HCFCs. 

    Energy efficient
    RMAX Orange Board® is energy efficient through its excellent thermal insulation performance. It provides energy cost savings for home owners.

    Excellent thermal insulation
    The thermal capabilities of RMAX Orange Board® assists designers and builders to achieve a high energy rating throughout the life of the building.

    Cost effective
    RMAX Orange Board® clads and insulates in the one operation. The large panels can quickly cover large external surfaces, leaving internal cavities free to enable easy installation of services.

    Ease and speed of installation
    Large panels (up to 5000 x 1200mm) can quickly cover the exterior walls. The durable textured surface needs no preparation prior to render.

    Fire retardant
    RMAX Orange Board® contains a fire retardant additive to reduce the likelihood of fire (It self-extinguishes when the source of the flame is removed).

    Australia wide sales and service
    RMAX Orange Board® is manufactured by RMAX, Australia’s largest producer of EPS, with offices in all states. Experienced staff are available to advise and answer queries.

    Moisture and rot resistant
    The RMAX Orange Board® System meets the requirements of BCA P2.2.2 – Weather Proofing. RMAX Orange Board® has excellent resistance to moisture absorption in water. Due to its closed cell structure, moisture gain has limited effect on thermal resistance values.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Cladding Materials and you can find more information and data sheets on this product by following the links to the RMAX Render website. This Certified EPS Polystrene is a fully compliant system. It has a BAL 29 Rating and is BAC Compliant / CODEMARK approved.

     

    Rmax Orange Board EPS Polystyrene System

    Brochure Rmax Orange Board EPS Polystyrene System

     

  • $4.50

    Tenacious Blue Cloth Tape 36mm

    Tenacious RenderMask Cloth Tape 36mm
    Tenacious K180 RenderMask™ cloth tape has been specifically developed for the rendering industry. The product provides 14 Day UV protection on aluminium window frames during the rendering process. Adheres to concrete, brick-work, aluminium, PVC and painted surfaces.

    The product is waterproof, clean removes and snaps off loose render when the tape is removed, providing an ultra clean finish.

    Tenacious RenderMask™ is an industry standard.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Tradies so if you are looking for the right man for your job we can connect you without delay.

    This product is part of our large selection of tape’s and you can find more information on this product by following the link below.

     

    Tenacious Blue Render Cloth Tape

     

  • $6.00

    Tenacious Blue Cloth Tape 48mm

    Tenacious RenderMask Cloth Tape 24mm (48Box)
    DESCRIPTION

    Tenacious K180 RenderMask™ cloth tape has been specifically developed for the rendering industry. The product provides 14 Day UV protection on aluminium window frames during the rendering process. Adheres to concrete, brick-work, aluminium, PVC and painted surfaces.

    The product is waterproof, clean removes and snaps off loose render when the tape is removed, providing an ultra clean finish.

    Tenacious RenderMask™ is an industry standard.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Tradies so if you are looking for the right man for your job we can connect you without delay.

     

    This product is part of our large selection of tape’s and you can find more information on this product by following the link below.

     

    Tenacious Blue Render Cloth Tape

     

  • $3.00

    Tenacious Cloth Tape 24mm

  • Placeholder
    $2.00

    Tenacious Electrical Tape 18mm

    Tenacious Electrical Tape 18mm

  • $50.75

    Unitex 333 Fine Texture 15L

    Unitex Uni-Trowel 333 Fine Texture 15L

    Size: 15L pail

    Coverage:

    Fine: 9-10 m2

    Suitable over: Unitex Specialty Renders

    Apply with: Trowel

    Safe Use: Refer to the MSDS

    As the name implies, this range of Unitex Textured Finishes is designed for trowel application. The products in the Uni-Trowel Décor™ range are applied as a single coat, with the exception of the finer finishes (146 and 333) which due to substrate and or weather conditions, may require an additional wet on wet coat.  Unitex Applied Texture Finishes are acrylic-bound textured coatings designed for decorating interior and exterior walls. Unitex Applied Texture Finishes are suitable for use over surfaces prepared with Render from the Unitex Specialty Renders range. A one coat application offers a long life heavy duty coating. Fine texture coats, i.e. Unitex 146, may require wet on wet two coats. The majority of our Finishes are ready-to-use, water-based products. Unitex Applied Texture Finishes are ideal for commercial and residential exterior walls. Due to the strong binding power of the acrylic, an impact-resistant coating results.  The surface prevents scuffing and is able to withstand hard knocks. Uni-Trowel Décor range are available pre-coloured in 15ltr pails, they contain quality graded fine mineral components and aggregates, together with non-absorbent extenders bound by a well-proven acrylic co-polymer. Coverage rates vary considerably with the surface condition and absorption effect. Typical coverage rates are 6 -10m² per pail. There are several grades of Uni-Trowel Décor.

     

    Biological Resistance
    Resistance to attack from bacteria and fungi is provided. This product being a water based acrylic system offers safe handling and low toxicity properties. Dirt, grime and dust on the surface of coatings will act as seed beds for bacterial attack, therefore cleaning and maintenance of your coating is essential to hinder bacterial and fungal attack.

     

    Fire Resistance The full Unitex coating system when subjected to the Early Fire Hazard Tests – Australian Standard AS1530.3:1999 meets the strictest standards.

     

    Water Resistance
    The coating, even at exceptionally high build, is formulated with a water vapour permeability factor to allow water vapour from the substrate to leave unhindered and to rainproof the exterior. Rising damp and elevated levels of moisture in the substrate will damage, and possibly delaminate, the surface coating. Please ensure that damp coursing the substrate is in place and prior test moisture content with a moisture meter (maximum 12% WME is allowed) (Builder responsibility).

     

    Colour
    The pigmentation is completely integrated during the manufacturing process, which means colour through the entire film thickness. Applied Finishes are available in a practically unlimited range of full colour to pastel shades. Please contact Unitex for the full range of colours available.
    Note: Some deep tones cannot be supplied in applied finishes. Contact Unitex for your specific solution. All colours will fade to some degree with time in exterior systems. Do not apply pigmented texture coats over fresh and or not fully cured renders as efflorescent damage (white blotching) may occur. Each pail has a label with the unique code identifying the particular texture type, colour and batch number. This coding ensures that if you require additional product (say to finish off a job), Unitex can match the texture and colour to the original. Note: Conditions on site may change and therefore colour outcome may be different when applied under varying weather conditions.  It is advisable always order 1 or 2 more pails than are required for the job. The pails have a strong sealed lid to prevent spillage if they should tip over before opening. Even after opening the lid still fits tightly enough when re-sealing to prevent contamination of the remaining product. The product must be protected from heat and cold during transit and storage.

     

    Application Details
    A minimum of 72 hours, under ideal temperate conditions, is required for through-dry (and cure) of the render, when the surface is trough dry the Unitex Textured Finish coat may be applied. Dry is measured to be less than 12% WME (Wood Moisture Equivalent) where measured on a Protimeter® Moisture Meter. The substrate must be clean before applying the Finish coat. Any crumbling, loose or damaged substrate render must be removed and the surface patched and made good prior to coating. All surfaces must be free of grease, oils, dirt and dust. Pre-painted surfaces must have flaking paint wire brushed back to a sound substrate. Unitex recommends a base coat of a pigmented Unitex Uni-Substrate Sealer (2 coats) over old renders prior to application of the surface finishes. If multi coats are desired then a minimum of 72 hours between each coat is required. All Unitex Applied Texture Finishes are designed to overcoat Unitex Render from our specialty render range. See Unitex Renders sections for information on suitable base render to use. Application should not be carried out under excessively cold conditions (below 7 °C) or in hot windy conditions (above 32°C).

     

    Site
    Unitex strongly advises sign off on all coating systems. Always provide the Builder and Designer with a site texture sample of minimum 2m², finish and colour for written approval nominated the Unitex specified system.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Unitex website.

     

    Unitex 333 Fine Texture

    MSDS Unitex 333 Fine Texture

  • $59.60

    Unitex 888 Medium Texture15L

    Unitex Uni-Trowel 888 MediumTexture 15L

    Size: 15L pail

    Coverage:

    Fine: 9-10 m2

    Suitable over: Unitex Specialty Renders

    Apply with: Trowel

    Safe Use: Refer to the MSDS

    As the name implies, this range of Unitex Textured Finishes is designed for trowel application. The products in the Uni-Trowel Décor™ range are applied as a single coat, with the exception of the finer finishes (146 and 333) which due to substrate and or weather conditions, may require an additional wet on wet coat.  Unitex Applied Texture Finishes are acrylic-bound textured coatings designed for decorating interior and exterior walls. Unitex Applied Texture Finishes are suitable for use over surfaces prepared with Render from the Unitex Specialty Renders range. A one coat application offers a long life heavy duty coating. Fine texture coats, i.e. Unitex 146, may require wet on wet two coats. The majority of our Finishes are ready-to-use, water-based products. Unitex Applied Texture Finishes are ideal for commercial and residential exterior walls. Due to the strong binding power of the acrylic, an impact-resistant coating results.  The surface prevents scuffing and is able to withstand hard knocks. Uni-Trowel Décor range are available pre-coloured in 15ltr pails, they contain quality graded fine mineral components and aggregates, together with non-absorbent extenders bound by a well-proven acrylic co-polymer. Coverage rates vary considerably with the surface condition and absorption effect. Typical coverage rates are 6 -10m² per pail. There are several grades of Uni-Trowel Décor.

     

    Biological Resistance
    Resistance to attack from bacteria and fungi is provided. This product being a water based acrylic system offers safe handling and low toxicity properties. Dirt, grime and dust on the surface of coatings will act as seed beds for bacterial attack, therefore cleaning and maintenance of your coating is essential to hinder bacterial and fungal attack.

     

    Fire Resistance The full Unitex coating system when subjected to the Early Fire Hazard Tests – Australian Standard AS1530.3:1999 meets the strictest standards.

     

    Water Resistance
    The coating, even at exceptionally high build, is formulated with a water vapour permeability factor to allow water vapour from the substrate to leave unhindered and to rainproof the exterior. Rising damp and elevated levels of moisture in the substrate will damage, and possibly delaminate, the surface coating. Please ensure that damp coursing the substrate is in place and prior test moisture content with a moisture meter (maximum 12% WME is allowed) (Builder responsibility).

     

    Colour
    The pigmentation is completely integrated during the manufacturing process, which means colour through the entire film thickness. Applied Finishes are available in a practically unlimited range of full colour to pastel shades. Please contact Unitex for the full range of colours available.
    Note: Some deep tones cannot be supplied in applied finishes. Contact Unitex for your specific solution. All colours will fade to some degree with time in exterior systems. Do not apply pigmented texture coats over fresh and or not fully cured renders as efflorescent damage (white blotching) may occur. Each pail has a label with the unique code identifying the particular texture type, colour and batch number. This coding ensures that if you require additional product (say to finish off a job), Unitex can match the texture and colour to the original. Note: Conditions on site may change and therefore colour outcome may be different when applied under varying weather conditions.  It is advisable always order 1 or 2 more pails than are required for the job. The pails have a strong sealed lid to prevent spillage if they should tip over before opening. Even after opening the lid still fits tightly enough when re-sealing to prevent contamination of the remaining product. The product must be protected from heat and cold during transit and storage.

     

    Application Details
    A minimum of 72 hours, under ideal temperate conditions, is required for through-dry (and cure) of the render, when the surface is trough dry the Unitex Textured Finish coat may be applied. Dry is measured to be less than 12% WME (Wood Moisture Equivalent) where measured on a Protimeter® Moisture Meter. The substrate must be clean before applying the Finish coat. Any crumbling, loose or damaged substrate render must be removed and the surface patched and made good prior to coating. All surfaces must be free of grease, oils, dirt and dust. Pre-painted surfaces must have flaking paint wire brushed back to a sound substrate. Unitex recommends a base coat of a pigmented Unitex Uni-Substrate Sealer (2 coats) over old renders prior to application of the surface finishes. If multi coats are desired then a minimum of 72 hours between each coat is required. All Unitex Applied Texture Finishes are designed to overcoat Unitex Render from our specialty render range. See Unitex Renders sections for information on suitable base render to use. Application should not be carried out under excessively cold conditions (below 7 °C) or in hot windy conditions (above 32°C).

     

    Site
    Unitex strongly advises sign off on all coating systems. Always provide the Builder and Designer with a site texture sample of minimum 2m², finish and colour for written approval nominated the Unitex specified system.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Unitex website. 

     

    Unitex 888 Medium Texture

     

     

  • $17.35

    Unitex Base Board 8.5Kg

    Unitex Uni-Dry Cote Base Board Render 8.5Kg

    Designed for application as a build coat for the Unitex Base Board™ and IB Board systems. Applied at minimum thickness of 5mm. A super lightweight product (8.5kg) and easy to use for most skill levels.

     

    Size: 8.5kg bags

    Coverage: 1.5-2m2

    Suitable for: Uni-Base Board systems

    Apply with: Trowel

    Safe Use: Refer to the MSDS 

    Unitex® Uni-Dry Cote® BBR is specially formulated to be a strongly-adherent render on the pre-coated Unitex Uni-Base Board. Together with the other Unitex® components, Unitex® Uni-Dry Cote® BBR is an integral part of the Uni-Base Board™ external insulating cladding system; another member of the Uni-EIFS™ range. Unitex® Uni-Dry Cote® BBR is trowel-applied and suitable for a one-coat or two-coat application on Uni-Base Board™.

    Unitex® Uni-Dry Cote® BBR is a cement-based polymer modified, high performance water resistant and adhesion promoting render system. This product is workable at thicknesses up to approximately 5-10mm per pass.

    Uni-Dry Cote® BBR is supplied in ready-to-use 8.5kg bags. 

    Approximate coverage per bag is 1.5-2m².

    Unitex® Uni-Dry Cote® BBR, when dry and fully cured, is over coated with any of the range of Unitex® Roll, Trowel or Brush Applied Texture coating systems. This completes the Uni-Base Board™ insulating system, from the Uni-EIFS™ range. 

    BBR (Base Board Render 8.5kg) is approved for use over Unitex supplied Uni-IB Board (full reinforcing mesh 160GSM incorporated), but is not accredited or tested to conform to the NCC under CodeMark and BRANZ. For a fully accredited and Unitex warranted system, the only option is the Unitex Base Board System, installed as per the Unitex Base Board Technical Manuals.

    BBR (Base Board Render 8.5kg) is approved by Unitex for use over suitable masonry surfaces within a complete Unitex coatings system (i.e. base preparation coat, filler levelling coat/s, top finishing coats)

     

    Condition of Substrate

    Before application of any render the surface of the substrate must be clean, dry and free of any debris. This means that any loose or damaged substrate must be removed, or patched and made good, prior to application of the base render.

    The substrate surface must be cleaned free of any grease, oils, scaling laitance, efflorescence, form-oil compounds, mould, fungi, rust, dirt, dust or any other foreign matter.

    It is the responsibility of the Builder or Head Contractor to make good any substrate before the render is applied. Contact Unitex for advice or site visit by our representatives.

    Adequate expansion joints are required to minimise cracking on the surface of the render. Location of the expansion joints is also the responsibility of the Builder or Head Contractor. Unitex® recommends expansion joints to every elevation and between different substrates, to allow for building movements and or stresses. Ideally, expansion joints should be at all penetrations to wall surface.

    If such expansion joints are not provided by the Builder or Head Contractor, cracking due to movement of the substrate may occur. This is in no way indicative of faulty material. Rather it indicates sub-standard building practice.

     

    Adding Water

    Uni-Dry Cote® Render™ products are dry powder-based products. This means that you are getting a 100% active product. All that is required is for clean water to be mixed in, on site, immediately prior to application to the substrate.

    The recommended starting point is to add approx. 25% by volume, (based on the amount of powder render to be used), of water into a clean container. Then slowly add the powder, with drill mixing, until the desired slump (consistency) is achieved.

    Unitex® Uni-Dry Cote® BBR should be left a minimum 72 hours after application and wait until fully cured before overcoating with a texture from the Unitex Applied Finishes range.

    • Trowels on easily, smoothly and thinly

    • Is polymer-modified for strong adhesion to surface

    • Is more water resistant than conventional render

    • Just Add Water – less margin for errors

    • An integral component in the Uni-Base Board EIFS system

     

    Guide to Good Mixing Consistency

    1. Add the contents of the bag slowly to 4 litres of water (25% volume of entire bag) with vigorous drill mixing to ensure a lump free render of required slump.

    2. The mix can be later water thinned to required viscosity.

    3. Ensure wall surface is stable, clean, dry and free of dust, etc prior to application.

    4. For difficult masonry and non-masonry surfaces contact Unitex for product and surface preparation advice.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Unitex website.

     

    Unitex Baseboard Render

    MSDS Unitex Render Base Board Render

     

  • $19.15

    Unitex Dry Poly 19Kg

    Unitex Uni-Dry Cote Polymer Render 19Kg

    Designed for application over difficult substrates as primary key coat. The strongest adhering render in the range. Requires the addition of 5-10% cement (drill mixed) into the Unitex Polymer Render just prior to use, which aids in faster cure and setting. Coverage for key coating is approximately 8-10 m2 per pail.

     

    Size: 19kg bags or 15L pail

    Coverage: 8-10m2

    Suitable for: 15L Pail – Painted Brick, New & / or Old Brick,
    In-situ Concrete (Rough), Fibrous-Cement Sheeting

    15kg Bag – New & / or Old Brick,
    In-situ Concrete (Rough), Fibrous-Cement Sheeting

    Apply with: Trowel

    Safe Use: Refer to the MSDS 

    Unitex® Polymer Render is a trowel-applied acrylic filling and levelling compound, suitable for application on dry, non-porous and difficult surfaces. Unitex® Polymer Render is also used for patching, levelling, skim coating and restoration of damaged surfaces. Unitex® Polymer Render is the strongest adhering render available from the Unitex® range of speciality render products.

    Unitex® Polymer Render is designed for use over FRC sheeting as a levelling preparation skim coat and is trowel applied prior to over coating with Texture from the Unitex Applied Finishes range.

    Unitex® Polymer Render is supplied in 15 litre sealed pails and is drill mixed (Ribbon Blade) with 5-10% cement added immediately prior to its application. Unitex® Polymer Render is also available in ready-to-use 19kg bags, see mixing guide below for consistent quality.

    Approximate coverage per pail or bag is 8-10m² (over reasonably level FRC sheeting).

    Direct from the pail, Unitex® Polymer Render can be used internally up to a depth of 3 mm and externally up to a depth of 5 mm. Adding 5-10% cement allows for greater depths of patching and rendering. Added cement amount may vary to allow for faster setting and rain proofing time.

    Once the Unitex® Polymer Render is on the wall it must be trowel finished with speed immediately, as this type of modified render tends to dry from the surface first. Unitex® Polymer Render is not recommended for application where coating thicknesses greater than 5 mm are required.

    Note: All Unitex® Render products are designed to be over coated with a Unitex® Applied Texture and two coats of Uni-Flex PTC™.

     

    Condition of Substrate

    The substrate surface must be dry, cleaned free of any grease, oils, scaling laitance, efflorescence, form-oil compounds, mould, fungi, rust, dirt, dust or any other foreign matter.

    It is the responsibility of the Builder or Head Contractor to make good any substrate before the render is applied.

    Adequate expansion joints are required to minimise cracking on the surface of the render. Location of the expansion joints is also the responsibility of the Builder or Head Contractor. Unitex® recommends expansion joints to every elevation and between different substrates, to allow for building movements and or stresses. Ideally, expansion joints should be at all penetrations to wall surface.

    If such expansion joints are not provided by the Builder or Head Contractor, cracking due to movement of the substrate may occur. This is in no way indicative of faulty material. Rather it indicates sub-standard building practice.

     

    Unitex® Polymer Render:

    • Trowels on easily, smoothly and thinly

    • Is the strongest render in the Unitex Renders Range

    • Is more waterproof than conventional render

    • Ideal for patching, levelling, skim coating and restoration of damaged surfaces

    • Ideal for FRC sheeting

    • Just add 5-10% cement (15ltr pail)

    • Just add water (19kg bag)

     

    Step-By-Step Instructions for FRC Sheet

    1. Apply the mixed Unitex® Polymer Render to the sheet gaps and embed the pre-cut (50 mm) Uni-Mesh (alkaline resistant). Allow to dry fully before step (2).

    2. Skim coat with Unitex® Polymer Render over whole of FRC Sheet surface with a steel or perspex trowel to a depth of approximately 2-3 mm. If studs behind the sheet are uneven then use Unitex® Polymer Render a little thicker to feather out the worst of the unevenness.

    3. When the Unitex® Polymer Render is through dry and cured for minimum 48 hours, in temperate conditions, overcoat with any of the Unitex® range of applied finishes (eg Uni-Trowel Décor, Uni-Roll Décor).

    4. The system requires the above (when through dry) to be over coated (by roller) with one coat of Uni-Flex Membrane (wet 011, or Dry 811) at a rate of approximately 2m² per litre or two coats of Uni-PTC (Unitex® Protective Top Coat 111).

     

    Guide to Good Mixing Consistency (19kg Bag)

    1. Add the contents of the bag slowly to 4 litres of water (25% volume of entire bag) with vigorous drill mixing to ensure a lump free render of required slump.

    2. The mix can be later water thinned to required viscosity.

    3. Ensure wall surface is stable, clean, dry and free of dust, etc prior to application.

    4. For difficult masonry and non-masonry surfaces contact Unitex for product and surface preparation advice.

     

    Adding Cement (15ltr Pail)

    Activation of Polymer Render in 15ltr pail is required. To activate Unitex Polymer Render, mix 5-10% cement immediately prior to application. Add the cement to the bucket with vigorous drill mixing to ensure a lump free required slump.

    Note: If less than full bucket required, empty amount required into another pail and activate. When polymer render is activated, there is a limited (weather dependant) time to apply.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

     

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Unitex website.

     

    Unitex Dry Poly Render

    MSDS Unitex Dry Poly Render

  • $33.00

    Unitex Dry Texture 855 20kg

    Unitex Uni-Dry Cote Powder Texture 20Kg

    Trowel applied dry powder finish coats which require the mixing of water on site. Uni-Cote Textures provide the textured effect with the Uni-PTC top coat, or Uni-Flex membrane, to provide the colour. The Uni-Cote Dry Powder Texture range separate texture from colour and therefore is ideal in weather/temperature conditions where it may be difficult to achieve rapid, through drying of an acrylic based texture coat. This product must be over-coated with Unitex Uni-PTC for decorative colour effect.

    Unitex 846 fine sand texture

    Unitex855 medium texture

     

     

    Size: 20kg bags

    Coverage: 8-12m²

    Suitable over: Unitex Speciality Renders

    Overcoated with: Uni-PTC (Protective Top Coat)

    Apply with: Trowel

    Zero emission product

    Safe Use: Refer to the MSDS

    Add water, Mix & Apply

    Unitex Uni-Dry Cote® unique powder finishes are dry powder-based products. They are a cement modified, polymer-based blend of fine marble, quality-graded mineral and polymeric additives to provide a 100% active product. On-site, all that has to be added is water to provide a ready-to-apply finish.

    Unitex Applied Texture Finishes are polymer/mineral bound textured coatings designed for decorating interior and exterior walls. Unitex Applied Texture Finishes are suitable for use over surfaces prepared with render from the Unitex Specialty Renders range. A one coat application offers a long-life, heavy-duty coating.

    Unitex Applied Texture Finishes are ideal for commercial and residential exterior walls. Due to the strong binding power of the acrylic, an impact resistant coating results.  The surface prevents scuffing and is able to withstand hard knocks.

    Unitex Uni-Dry Cote® Powder Finishes are supplied in 20kg multi-walled paper sacks. They contain quality graded fine mineral components and aggregates, together with non-absorbent extenders bound by a well-proven polymer system. Typical coverage is 8-12m² per bag.

    There are four grades of Unitex Uni-Dry Cote®.  

    In order, from coarsest to finest, they are;

    Unitex 855 – Medium Towel Finish

    Unitex 846 – Fine Trowel Finish

    Uni-Cote Dry Powder Finishes:

    Biological Resistance 

     

    Resistance to attack from bacteria and fungi is provided. This product being a cement modified water based polymer system offers safe handling and low toxicity properties. Dirt, grime and dust on the surface of coatings will act as seed beds for bacterial attack, therefore cleaning and maintenance of your coating is essential to hinder bacterial and fungal attack.

     

    Fire Resistance

    The full Unitex coating system when subjected to the Early Fire Hazard Tests – Australian Standard AS1530.3:1999 meets the strictest standards.

     

    Water Resistance

    The coating, even at exceptionally high build, is formulated with a water vapour permeability factor to rainproof the exterior and allow water vapour from the substrate to leave unhindered. Rising damp and elevated levels of moisture in the substrate will damage, and possibly delaminate, the surface coating. Please ensure that damp coursing the substrate is in place and prior test moisture content with a moisture meter (maximum 12% WME is allowed) (Builder responsibility).

     

    Colour

    The Unitex Uni-Dry Cote® Powder Finishes are not pigmented products. They dry on the surface to a ‘cement-off-white’ colour. The desired topcoat colour is achieved by application of a pigmented protective membrane such as Unitex Uni-PTC for a matt surface effect or Unitex Uni-Flex Membrane for a satin surface finish. 

     

    Application Details
    A minimum of 72 hours, under ideal temperate conditions, is required for through-dry (and cure) of the render, when the surface is through dry the Unitex Textured Finish coat may be applied. Dry is measured to be less than 12% WME (Wood Moisture Equivalent) where measured on a Protimeter® Moisture Meter.

    The substrate must be clean before applying the Finish coat. Any crumbling, loose or damaged substrate render must be removed and the surface patched and made good prior to coating. All surfaces must be free of grease, oils, dirt and dust. Pre-painted surfaces must have flaking paint wire brushed back to a sound substrate. Unitex recommends a base coat of a pigmented Unitex Uni-Substrate Sealer (2 coats) over renders prior to application of the surface finishes.

    If multi coats are desired then a minimum of 72 hours between each coat is required.

    All Unitex Applied Texture Finishes are designed to overcoat Unitex Render from our specialty render range. See Unitex Renders sections for information on suitable base render to use. Unitex Uni-Dry Cote® Powders, when through dry and cured, are to be over coated with two coats of a Unitex Uni-PTC Protective Membrane. 

    Application should not be carried out under excessively cold conditions (below 7 °C) or in hot windy conditions (above 32°C).

     

    Guide to Good Mixing Consistency

    1. Add the contents of the bag slowly to 4 litres of water (25% volume of entire bag) with vigorous drill mixing to ensure a lump free render of required slump.  Allow to stand for 5-10 minutes and re-whip with mixer to allow efficient wetting and ideal application consistency.

    2. The mix can be later water thinned to required viscosity within 1 hour of initial mixing.

    3. Ensure wall surface is stable, clean, dry and free of dust, etc prior to application.

     

    Site

    Unitex strongly advises sign off on all coating systems. Always provide the Builder and Designer with a site texture sample of minimum 2m², finish and colour for written approval nominated the Unitex specified system.

     

    wettrades.com

    As a small streamlined business we are able to deliver to quality products at a great price. Although we deliver Australia wide our business offers super quick and reliable service to Melbourne and especially the Bayside area as we are located in Highett. We also deal with a large range of reliable Renderer’s so if you are looking for the right tradesman for your job we can connect you without delay.

    This product is part of our large selection of Render materials and you can find more information and data sheets on this product by following the links to the Unitex website.

     

    Unitex Dry Texture